Will these covers fit my pickups?

[ghostmaker]

I have an SH-1 '59 for neck and SH-5 Custom for bridge on their way, and am planning to put nickel covers on them cus I like the look. Of course I turn to good ol' eBay.

I looked at the dimensions on the website but really I'm not great at reading these kinds of things or determining if it's close enough or not. Will these covers be able to fit the pickups?

Here is the description.

Seymour Duncan Humbucking Pickup Covers Nickel for Vintage Sized Humbuckers NEW!

This is a set of of two Seymour Duncan nickel plated humbucking pickup covers for vintage-spaced pole pieces - neck and bridge both have 1 15/16" spacing. These are brand new as pictured.

The outer dimensions (L x W x H) are 2.745" x 1.495" x .618", pole piece holes are 1 15/16" spacing e-to-e on center. The cover is, itself is .02" thick if you need to calculate the inside dimensions.

These are not cheapo brass knockoffs, they are nickel-silver. Very high quality, do not steal your pickup's highs, and an excellent shape. Same equipment found on all of Duncan's covered pickups, and will fit any similar humbuckers per the dimensions above.

 

[ehdwuld]

Re: Will these covers fit my pickups?

ok
Here is the SH-1 dimensions

length and width look good but pole spacing is 2.0"

 

[lemonman]

Re: Will these covers fit my pickups?

If they are Duncan vintage spaced covers they will fit all the PAF/SH series pups, not the TB models. Gibson neck covers will fit, too.

 

[ghostmaker]

Re: Will these covers fit my pickups?

ok
Here is the SH-1 dimensions

length and width look good but pole spacing is 2.0"

This was my concern, if the spacing on the covers are 1 15/16", they won't fit perfectly will they?

 

[ehdwuld]

Re: Will these covers fit my pickups?

umm looks about one sixteenth off

screw heads may cover it tho