Wirering help

hey, i just started in this forum and i was wondering if you all could help me out. i have a strat which i would like to rewire. i would like to have on and off switches for each one and a master volume, i'm 14 and i know nothing about wireing.sorry for the trouble and thanks for helping out.
 
Re: Wirering help

welcome

so, you want no 5-way? no tone controls?

just connect each pup's hot wire to one pole of its on-off switch and the other pole of each switch to the right side lug of the volume pot ... ground the left side lug of the volume pot and send the center lug to the tip of the output jack ... make sure that each pup's ground wire is electrically connected to the sleeve of the output jack

these should help

http://www.seymourduncan.com/support/schematics/sgl_coil_1vol.html

http://www.seymourduncan.com/support/schematics/individual_on_off_switches.html

good luck
t4d
 
Last edited:
Back
Top