Wiring clarification - "import switch" help

[DCikes88]

Hi,
I found the wiring diagram I want to follow from SDs diagram base (attached below).

Since my guitar is an import, I have trouble "translating" the 3way switch styles.

Can someone pls confirm is this attached image an accurate translation?

Thank you in advance!

 

[eclecticsynergy]

That looks right to me, though I'm not an expert on imports.
I do know, however, that some Japanese three-ways are a bit different from most Asian imports.
If the guitar in question is Japanese, you might check the connectivity against this pic:

 

[DCikes88]

Thanks for the reply.
It's a Made in China Jackson JS42. The thing is, I'm replacing the chinese switch with a Schaller 3-way, which, being German, looks and feels much nicer, but it still has inline connections, like an "import".
I'll try to find some Schaller specific material to compare.

 

[Artie]

Can you post a pic or link to the Schaller? That could be a different animal altogether.

 

[DCikes88]

It's this one, Schaller 3-way Megaswitch S+T.

 

[Artie]

Here's a good starting point. The S & T are the same. I'll see if I can translate the Duncan diagram to the Schaller.

https://schaller.info/en/megaswitch-s#

This link is better: https://schaller.info/en/megaswitch-t

Scroll down to the one labeled SS1. Technically, it's a Telecaster, but you're doing the exact same thing except using humbuckers.

 

[Artie]

Like this, but just pretend the singles are your humbuckers: (Run your red & wht's to your push-pull like the Duncan diagram.)

 

[DCikes88]

Like this, but just pretend the singles are your humbuckers: (Run your red & wht's to your push-pull like the Duncan diagram.)

Yup, exactly. Thanks! Figured that one out when I realized all supported Schaller diagrams with HH configs had exclusively three pots in the scheme.