Wiring Diagram Help

[Silver777Guitarist]

Okay so I am trying to create a pretty odd wiring setup, I need some help with creating a diagram to work with I am going to be wiring my guitar with a standard pickup switch, a volume and tone thats where normal finishes I also am going to be installing a on/on switch coil tap and a button killswitch is there anyone who could lay this out for me. Both of my pickups have four conductor wiring so that isn't a problem.

Thanks in advance

 

[austin]

Re: Wiring Diagram Help

Other than the kill switch, that sounds like this diagram:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w_1pp

For the kill switch, instead of sending the wire from the master volume to the output, you would want to add in this switch:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=kill_switch

That should do it.
-
Austin

 

[GuitarDoc]

Re: Wiring Diagram Help

I presume you mean coil split not "coil tap" since you say both of your pups have 4 conductor wiring. And by "standard pickup switch" I assume you are referring to a Les Paul type toggle.

This diagram shows the coil split:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w_1pp

It shows a push/pull vol pot but can be a separate toggle switch wired just the same. The kill switch (a single pole on/off?, or two pole which shorts the output to ground?) can be added to the "hot" wire leading to the output jack.

 

[Silver777Guitarist]

Re: Wiring Diagram Help

Thanks guys much appreciated these should seriously help out and my apologies for calling it a coil tap, its sort of a home town slang thing.