wiring gurus - please take a look at my wiring diagram

V

vachterm

New member
i'm about to wire a warmoth guitar for a friend.
the guitar is strat style but it has 2 humbuckers and a 3 way switch.
the wiring we're going for is Master volume (with treble bleed), Master tone ("treble control") and master tone ("bass control").
so the idea is to have 1 tone pot act normally as a low pass filter and another to act as a hi-pass filter.

i drew this schematic up and would like to hear your opinions.
also if anybody has any advice regarding the caps/resistors values to be used, i'm all ears.

thanks!
Udi.

HH1V1T1B3WaySD.jpg
 
Re: wiring gurus - please take a look at my wiring diagram

This is a job for our G&L enthusiasts. The passive Treble 'n' Bass tone control schematic is probably freely available from G&L or via Google.
 
Re: wiring gurus - please take a look at my wiring diagram

Funkfingers said:
This is a job for our G&L enthusiasts. The passive Treble 'n' Bass tone control schematic is probably freely available from G&L or via Google.
Click to expand...

so G&L uses a similar wiring scheme?
the idea of having a "bass" control actually came about because my friend played a reverend guitar with a "bass contour" control and he really liked it.
from his description it sounded like a hi-pass filter might do the same trick.
 
Re: wiring gurus - please take a look at my wiring diagram

Or just use a Fender TBX tone control. It does the same thing with one pot.

My only concern is that you have the signal going to both tone pots first and then to the vol pot in a series connection.
 
Re: wiring gurus - please take a look at my wiring diagram

GuitarDoc said:
Or just use a Fender TBX tone control. It does the same thing with one pot.

My only concern is that you have the signal going to both tone pots first and then to the vol pot in a series connection.
Click to expand...

how ould you sugest i tackle it / what would you suggest i change?
 
You must log in or register to reply here.
Back
Top