Wiring help needed

[Flash]

Hi guys I hope you can help me out with a wiring diagram for the following, I have a JB bridge humbucker and a 59 neck humbucker with a superswitch and a push/pull pot and would like the following wiring diagram if possible:-
neck series
neck parallel
neck & bridge parallel (n & b series when pot is pulled up)
bridge parallel
bridge series
is this wiring possible? I have asked for something similar before and got a few answers that were nearly there but involved me workin out the rest which is something i'm not intellectually gifted to do
but I can solder and wire up things ok as long as I have a diagram.
thanks in advance.

 

[Flash]

Re: Wiring help needed

oops forgot to say that the push/pull pot will be for a tone control. How do i wire that into the diagram? ( I have an ordinary pot for the volume).

 

[OUTLAW1969]

Re: Wiring help needed

Here is a good place to look:

http://www.deaf-eddie.net/drawings/drawings.html





Good Luck!

 

[Flash]

Re: Wiring help needed

cheers Outlaw, I tried it but what i'm looking for is not there. Thanks for the suggestion anyway

 

[Flash]

Re: Wiring help needed

bump!

 

[Nate]

Re: Wiring help needed

Have you hit up seymourduncan's list of wiring diagrams? They sure do have a lot of selections to choose from!

The diagram that I'm seeing that most closely matches what you're looking for is this:

http://www.seymourduncan.com/website/support/schematics/2hum_vol_tone_5way-w-split.html

Its a one volume/tone w/ a 5 way split. I'm not seeing anything for a push/pull option. Maybe I'm just overlooking something.

 

[Flash]

Re: Wiring help needed

Hi nate, I have checked out the seymour duncan website but there are no wiring diagrams for a superswitch :-(

 

[Flash]

Re: Wiring help needed

anuone?

 

[Flash]

Re: Wiring help needed

:-(