wiring help (phase switching) PLEASE!

[vachterm]

Hi All!
could use some help with some wiring.
basically what i haveis 2 buckers,a 3 way switch and 2 push/pulls.
what i want is to add a mini on-on-on spdt so that i could reverse the phase.


is it correct to assume that the only modification(wiring wise) needed to add the phase switch is to (say i choose to connect the bridge humbukcer to the spdt) connect bridge green wire to right side middle terminal(instead of ground where it would "normally" be),connect bridge black to left side middle terminal (instead of selector switch), criss-cross the rest of the terminals.
then, right side lower terminal to ground and left side lower terminal to selector switch?

SORRY but this is as clear as i can put it in words!

any help, readable schematic or whatnot would be highly appreciated!
thanks,
Udi.

 

[vachterm]

Re: wiring help (phase switching) PLEASE!

If your pickup is a humbucker with 4 conductors + bare (or shield) that's ok. You only need to phase out one of them.
Outphase neck for a Peter Green's tone.
Outphase bridge for a more cut edgy and screaming tone.

BUT, my friend, you just need a DPDT ON/ON, not an on/on/on.

right! just mixed up the spdt,dpdt and all that stuff.
if my wiring idea is correct then i'm good to go and you,Sir, have helped me a great deal once again!

cheers!
Udi.