wiring help

[jthm2004]

ok i recently got a sh-2 jazz for my neck and a sh-6 distortion fir the bridge
of my schecter omen-6

it has 1 volume 1 tone and a three way switch
i set them up the same as the stock Ddesigns were but i have two extra wires left,what do these go to?or better yet is there some pictures or something? :smack:

 

[Low_fidelity2100]

Re: wiring help

what color are the two left over wires? And why didn't you just follow the duncan schematic that comes with the pickups?

 

[Travis]

Re: wiring help

Assuming you wired the black as hot, the green and bare together for ground, then I'm guessing they're the white and red wires that are left. Those will need to be soldered together and taped off. If you have any questions, here's a schematic for you. http://www.seymourduncan.com/website/support/schematics/2hb_1vol_1tone_3way.html

By the way, nice combo. Good pickup choice.

 

[jthm2004]

Re: wiring help

i tried followibg the directions duncan gave but it was for a differnt setup

give me a sec to undo the back so i can see what colors were left as i dont remember :smack:

 

[tone4days]

Re: wiring help

no matter what you find when you open it up, do what travis said and you'll be golden

good luck
t4d

 

[jthm2004]

Re: wiring help

thanx travis,i wasnt sure if that was a good combo or not as its my first time with this stuff

 

[theodie]

Re: wiring help

If you need more help, check this out.
http://www.seymourduncan.com/website/support/schematics/2hb_1vol_1tone_3way.html

Btw, I agree with Travis. Great pickup combo!!! You will like them!!! Also,
Welcome to the Forum!!!

 

[jthm2004]

Re: wiring help

i love your avatar ,that show was so cool :cool3:

u guys should check out this place

http://forum.powertabs.net/index.php

 

[jthm2004]

Re: wiring help

ok now i pissed i did those diagrams exaclty to the T
and i checked and rechecked everything but now i get no sound at all