wiring help ?

aris17561

New member
Hello everyone... I have a strat hsh with the , lil59 neck , texas special ( true single coil ) midlle , and hotrails bridge...

May you help me with tha correct wiring diagram ? I want in the 2 and 4 position , to have the half humbucker ( coil split ) and the single coil play togeteher... Not the humbucker and texas play toggether because the texas doesnt have enough power to play with the hotrails at the same time. So i need the humbucker being splitted in 2 and 4. I dont know if i described well. I mean in 2 position for expample to play the half hotrails and the texas. And in 4th position to have the half lil59 kai the texas... May you send me a link with the correct wiring diagram ?

Thank you very much !!!
 
Re: wiring help ?

http://www.seymourduncan.com/suppor...tics.php?schematic=lilhum_sing_lilhum_1v_2t_s.

Since using a Fender single coil you might either have to reverse the black and green wires from the duncans OR the hot and cold from your middle,depending what you hear in terms of hum cancelation and phase.
I would also move the middle pickup tone to the bridge terminal next to it if I had the choice.

Ok man thank you very much . One more ... What the company suggest with hotrails ? A 250k volume pot or a 500k ? Is there any link to see what pots seymour suggests for all the pickups ?

Thank you
 
Re: wiring help ?

Start with what you already have in the guitar(I suppose 250k),if you need brighter go with 500k.
 
Re: wiring help ?

If you need some help with wiring and some changes in your diagram - Just contact me!
And for 2 humbuckers and one single I will try with 47 cap :)
 
Back
Top