Wiring Q for HSH, 1 Vol, 1 Tone (w/push-pull), 5 way switch

[Neo Fender]

In positions 2 and 4 with the humbucker coils split, (hopefully pull) will this schematic get me the slug or the screw coil of each humbucker? This is going in a 24 fret guitar so I think I want to have the screw coil on when split.

Thanks.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=HSH_1v_1t_5w_pushpull

 

[Edgecrusher]

Re: Wiring Q for HSH, 1 Vol, 1 Tone (w/push-pull), 5 way switch

With red and white to the switch you will get the slug coil.. if you want the screw coil you need green and black to the switch...

That being said i would not split to the screws in the bridge... in the neck sure.. but not the bridge.

 

[Neo Fender]

Re: Wiring Q for HSH, 1 Vol, 1 Tone (w/push-pull), 5 way switch

I was thinking the same thing - it may sound too thin. Thanks.

That being said i would not split to the screws in the bridge... in the neck sure.. but not the bridge.