I have a low wind Lollar Imperial in the neck of my tele and a custom wound (thanks Harrison!) single coil in the bridge. right now I have it wired with a regular ol three way switch and a mini switch that allows series/parallel for the Imperial. I have a 4 way switch and new control plate (without a hole between the vol and tone holes!) and was wondering if it's possible to wire the 4 way switch for the same function: 1. Bridge pup only 2. Bridge and neck ala regular ol tele 3. Neck pup in series, 4. Neck pup in parallel.
The diagrams I've found so far using a neck bucker and 4 way seem to just do the series/parallel thing when using both pickups, but I only want it to effect the neck bucker.
Is it possible? Should I just leave well enough alone? Suggestions? Diagrams? Thank you!
The diagrams I've found so far using a neck bucker and 4 way seem to just do the series/parallel thing when using both pickups, but I only want it to effect the neck bucker.
Is it possible? Should I just leave well enough alone? Suggestions? Diagrams? Thank you!