JohnnyGuitarCA
Active member
WTB PJ Marx pickups. Lemme know whatcha got. Thanks!
WTB - PJ Marx pickups
- Thread starter JohnnyGuitarCA
- Start date
idsnowdog
Imperator of Indignation
Re: WTB - PJ Marx pickups
You said earlier that you know PJ Marxx? Unfortunately there is little information on the Internet. There's a Brad Gillis bucker on eBay, but I think it is overpriced. I have an 812 that I am keeping until I get an idea what it sounds like in a Baritone I am building, I know the 412's I sold to Fusion1 would be too dark for a Baritone.
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
I like the Brad Gillis P/U. Years ago I installed one for a friend in his RG550. Sounded good. It's ballsy and rather dark. I WAS pretty surprised that the harmonics weren't all that great compared to other rock 'n roll pickups.
I own a Jeff Watson model which is brighter and harmonics FLY out of it!.
I like the Brad Gillis P/U. Years ago I installed one for a friend in his RG550. Sounded good. It's ballsy and rather dark. I WAS pretty surprised that the harmonics weren't all that great compared to other rock 'n roll pickups.
I own a Jeff Watson model which is brighter and harmonics FLY out of it!.
Last edited:
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
The latest one on eBay went for $150 and that's WAY overpriced.
There was a Brad Gillis p/u on eBay that sold for $39.95 a week or two ago. I should have snagged it but we're getting a new house so everything is going toward that right now. Ah well.
The latest one on eBay went for $150 and that's WAY overpriced.
There was a Brad Gillis p/u on eBay that sold for $39.95 a week or two ago. I should have snagged it but we're getting a new house so everything is going toward that right now. Ah well.
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
Yep, I know PJ. He's a great guy. Known him since he was 15, which was back in '81. He was a monster guitarist even back then!
I collect pickups and change them a LOT in my guitars, so if you decide that you want to sell your 812 please let me know. Thanks!
Yep, I know PJ. He's a great guy. Known him since he was 15, which was back in '81. He was a monster guitarist even back then!
I collect pickups and change them a LOT in my guitars, so if you decide that you want to sell your 812 please let me know. Thanks!
Last edited:
idsnowdog
Imperator of Indignation
Re: WTB - PJ Marx pickups
I bought three PJ marxx humbuckers and I was surprised! The two 412's were a very low K reading, but yet they were loud and clear! The 412's had a very deep bass, that I hadn't heard in a passive pickup. They also had a raspy high end that gave them presence. Big, round, punchy bass with a raspy high end. Since they are epoxy potted they are very transparent and they had massive balls, with fuzzy hair.
The 812, I really can't judge yet? I had it hooked up for a little while and it sounded like ass! The magnet was dead and I needed to recharge it. I recharged the magnet and it sounds like Tonni Iommi on Born Again. Dipped mids, solid and steathly bass and a piercing high end. I hope it works well with a Baritone guitar.
I bought three PJ marxx humbuckers and I was surprised! The two 412's were a very low K reading, but yet they were loud and clear! The 412's had a very deep bass, that I hadn't heard in a passive pickup. They also had a raspy high end that gave them presence. Big, round, punchy bass with a raspy high end. Since they are epoxy potted they are very transparent and they had massive balls, with fuzzy hair.
The 812, I really can't judge yet? I had it hooked up for a little while and it sounded like ass! The magnet was dead and I needed to recharge it. I recharged the magnet and it sounds like Tonni Iommi on Born Again. Dipped mids, solid and steathly bass and a piercing high end. I hope it works well with a Baritone guitar.
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
Are you getting a DiMarzio Super 3 to restore your HM Strat to original specs?
If you decide you want to sell the Brad Gillis p/u, please let me know. Thanks!
Are you getting a DiMarzio Super 3 to restore your HM Strat to original specs?
If you decide you want to sell the Brad Gillis p/u, please let me know. Thanks!
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
Born Again is my favorite Sabbath album, so lemme know if you decide to sell that 812! :headbang:
Born Again is my favorite Sabbath album, so lemme know if you decide to sell that 812! :headbang:
Re: WTB - PJ Marx pickups
I have a Super 3, but someone drill it for a direct mount.
The Brad Gillis was direct mounted in the HM strat as well. Kind of ironic, huh?
BTW, this pickup isn't the prettiest. It's made out of an orange resin/epoxy or something, that's been painted black. There is a couple of dings where the orange is showing through the black.
The Brad Gillis sticker on the back has a couple of pieces of tape over it.
I'll post pictures, but can someone else so that I can see if this is even legit or not?
I have a Super 3, but someone drill it for a direct mount.
The Brad Gillis was direct mounted in the HM strat as well. Kind of ironic, huh?
BTW, this pickup isn't the prettiest. It's made out of an orange resin/epoxy or something, that's been painted black. There is a couple of dings where the orange is showing through the black.
The Brad Gillis sticker on the back has a couple of pieces of tape over it.
I'll post pictures, but can someone else so that I can see if this is even legit or not?
Last edited:
Re: WTB - PJ Marx pickups
Impossible to tell. The guitar wiring was so hacked up you didn't know what was on when you switched pickups.
For one, someone put Aria dual rail singles in the neck and mid positions. These are humbucking singles of course.
But then they tied all of the middle connections together to a push/pull pot to go into single coil mode. Well, it you have every pickup tied half way to each other, what do you really have? Who knows.
I just started ripping stuff out. My hangup at the moment is the Super3 having the mounts drilled. I need a couple of nuts to solder to the baseplate so that I can install it correctly.
Then, I need a pair of correct single coils.
Impossible to tell. The guitar wiring was so hacked up you didn't know what was on when you switched pickups.
For one, someone put Aria dual rail singles in the neck and mid positions. These are humbucking singles of course.
But then they tied all of the middle connections together to a push/pull pot to go into single coil mode. Well, it you have every pickup tied half way to each other, what do you really have? Who knows.
I just started ripping stuff out. My hangup at the moment is the Super3 having the mounts drilled. I need a couple of nuts to solder to the baseplate so that I can install it correctly.
Then, I need a pair of correct single coils.
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
Yes, it's most likely legit. PJ Marx used to do all kinds of freaked out colors and mixtures of colors.
Yes, it's most likely legit. PJ Marx used to do all kinds of freaked out colors and mixtures of colors.
JohnnyGuitarCA
Active member
Re: WTB - PJ Marx pickups
Hi there,
Still looking for those pickups? If yes, send me an e-mail at:
guitarchives@wxs.nl
Sincerely,
Hans Moust
Hi there,
Still looking for those pickups? If yes, send me an e-mail at:
guitarchives@wxs.nl
Sincerely,
Hans Moust
JohnnyGuitarCA
Active member
Diezeldale
New member
Re: WTB - PJ Marx pickups
Clint, look here,
http://www.libertyammunition.com/contact-us/
let me know if you can do that interview!
Clint, look here,
http://www.libertyammunition.com/contact-us/
let me know if you can do that interview!
Tommy Tutone
New member
Re: WTB - PJ Marx pickups
I've got a very new 80's PJ Marx STS-B that I am taking out of my Strat and will sell for reasonable / fair price. I have a Seymour JB humbucker in bridge and feel that the PJ Marx does not match the other pick ups nor the kind of music I am playing. I have the original box and original schematic for it too.
I've got a very new 80's PJ Marx STS-B that I am taking out of my Strat and will sell for reasonable / fair price. I have a Seymour JB humbucker in bridge and feel that the PJ Marx does not match the other pick ups nor the kind of music I am playing. I have the original box and original schematic for it too.
Similar threads
