Monsta-Tone
New member
I know that is a very wide range of pickups to be looking for. I figure that if I have options, I will be much more likely to find something I'm looking for......
I have 3 or 4 project guitars right now. I'm looking for the following pickups. They can be black or zebra, I don't really care.
The longer the wire, the better.
Duncan - PATB-2 (especially looking for this one!)
Duncan - PATB-3 (neck)
Duncan - Custom (any version, preferably Custom 5)(Trembucker spacing)
Duncan - Pearly Gates (neck)
Duncan - P-Rails (neck)
Duncan - Hot Rails (neck)
DiMarzio - AT-1 (F-Spaced)
DiMarzio - Tone Zone (F-Spaced)
DiMarzio - PAF Joe (any spacing)(especially looking for this one!)
DiMarzio - PAF Pro (any spacing)
Gibson - 500T (wider spacing)
I have the following pickups that I would happily trade:
Duncan - Alnico II Trembucker (black, factory length wire, no logo, a little scratched up)
Duncan - Full Shred bridge (standard spacing)(black, 7-8" wire, pretty scratched/scuffed up)
DiMarzio - Tone Zone (standard spacing)(black, 7-8" wire, slightly scratched/scuffed up)
DiMarzio - Super Distortion (F-Spaced)(black, 4-5" wire, slightly scratched/scuffed up)
EMG - 81 (black, factory length wire, brand new, came out of ESP MH-1000)(quick disconnect cable)
EMG - 85 (black, factory length wire, brand new, came out of ESP MH-1000)(quick disconnect cable)
Ibanez - IBZ humbucker (2 of them)(from 1988 Proline guitars)(black, 6-7" wire)
Ibanez - IBZ single coil (4 of them)(from 1988 Proline guitars)(black, 7-9" wire)
Jackson - J50C humbucker (from 1988 Charvel Model 4)(black, really good condition for it's age, some fading on logo)
Jackson - JS200 stacked humbucker (2 of them)(from 1988 Charvel Model 4)(black, really good condition, some fading on logos)
Jackson - JT-6 bridge (black)(really good condition, missing 2 of the string lock blocks)
I have lots of great feedback on flea bay under the same user name.
I have lots of posts and have helped numerous people on the Boogie Board under the same user name.
Andy
808-214 five seven four six (home)
808-633 three nine four four (cell)
andy at amps-tubes dot com
Thanks!
I have 3 or 4 project guitars right now. I'm looking for the following pickups. They can be black or zebra, I don't really care.
The longer the wire, the better.
Duncan - PATB-2 (especially looking for this one!)
Duncan - PATB-3 (neck)
Duncan - Custom (any version, preferably Custom 5)(Trembucker spacing)
Duncan - Pearly Gates (neck)
Duncan - P-Rails (neck)
Duncan - Hot Rails (neck)
DiMarzio - AT-1 (F-Spaced)
DiMarzio - Tone Zone (F-Spaced)
DiMarzio - PAF Joe (any spacing)(especially looking for this one!)
DiMarzio - PAF Pro (any spacing)
Gibson - 500T (wider spacing)
I have the following pickups that I would happily trade:
Duncan - Alnico II Trembucker (black, factory length wire, no logo, a little scratched up)
Duncan - Full Shred bridge (standard spacing)(black, 7-8" wire, pretty scratched/scuffed up)
DiMarzio - Tone Zone (standard spacing)(black, 7-8" wire, slightly scratched/scuffed up)
DiMarzio - Super Distortion (F-Spaced)(black, 4-5" wire, slightly scratched/scuffed up)
EMG - 81 (black, factory length wire, brand new, came out of ESP MH-1000)(quick disconnect cable)
EMG - 85 (black, factory length wire, brand new, came out of ESP MH-1000)(quick disconnect cable)
Ibanez - IBZ humbucker (2 of them)(from 1988 Proline guitars)(black, 6-7" wire)
Ibanez - IBZ single coil (4 of them)(from 1988 Proline guitars)(black, 7-9" wire)
Jackson - J50C humbucker (from 1988 Charvel Model 4)(black, really good condition for it's age, some fading on logo)
Jackson - JS200 stacked humbucker (2 of them)(from 1988 Charvel Model 4)(black, really good condition, some fading on logos)
Jackson - JT-6 bridge (black)(really good condition, missing 2 of the string lock blocks)
I have lots of great feedback on flea bay under the same user name.
I have lots of posts and have helped numerous people on the Boogie Board under the same user name.
Andy
808-214 five seven four six (home)
808-633 three nine four four (cell)
andy at amps-tubes dot com
Thanks!
Last edited:
