YJM Furies...Need of some covers

[hatebreedgr]

Hello everyone. I've recently bought a set of YJM Furies with the black covers and i would like to get some white ones.
Did some online search but no luck. I even checked the Seymour Duncan site which offers some pickup cover replacements but not for stack pickups and not for YJM Furies.
The Furies, being stack pickups have a bigger height cover so none of the regular single coil cover will work (i tested with a SSL-5 i have and the cover doesn't fit at all).
Any suggestions where i could find some..?

thanks

 

[frankfalbo]

Re: YJM Furies...Need of some covers

I would assume if you contacted Duncan they could help you get some, but if not, then you should know that Yngwie uses non-Duncan covers with his Fury pickups all the time. Especially if he has to match the aging and color on a certain guitar. It's okay that the covers are shorter. The springs or tubing will press down against the pickup cover and bend the sides but that's what he does.

On a couple of occasions with stacks, I take the rubber surgical tubing, and cut a small slice of it just the right side to go in between the cover and the pickup, and I position it there to apply backpressure to the cover tabs from underneath.

 

[Farkus]

Re: YJM Furies...Need of some covers

I use Fender covers with mine all the time.

 

[hatebreedgr]

Re: YJM Furies...Need of some covers

Thank you very much frankfalbo and Farkus for your answers...

 

[Mincer]

Re: YJM Furies...Need of some covers

If you must have SD covers, you can ask your local dealer, but like the others have said, I use what I can find. If there is a gap, it is covered by the pickguard.

 

[SDK2]

Re: YJM Furies...Need of some covers

Exception makes the Plus stacks (e.g. STK-S4/6/7) . These are glued and cannot be changed. .

 

[Mincer]

Re: YJM Furies...Need of some covers

Yes, this is true. The Stacks, the Rails and some bass pickups have the covers glued on.