banner

Announcement

Collapse
No announcement yet.

Finally got a grip on my Weber Alnico speaker

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Finally got a grip on my Weber Alnico speaker

    I bought an Weber Alncio 12" speaker a couple of years ago and used it here and there but could never gel with it. I knew that it's supposed to have a great vintage crunch/compression especially with low wattage amps (mine is rated at 15W); I figured it would be a no brainer using one of my small wattage amps wound all the way up.

    But I could never find a cabinet/microphone combination that I really liked until today. I was bound and determined to use the Weber on some reamp tracks I was recording today and I stumbled across a combination that worked great after doing some research online.

    The amp was my EAST Studio 2 turned up ... about 75% of the way; well into power stage compression but there was still a touch of headroom left. This I crushed using a Hartman Tommy Bolin fuzz, Naga Viper, or Thundertomate Boost, as well as the strymon DECO.

    Cabinet is an Epiphone semi-closed 1x12.

    The ideal microphone turned out to be a ribbon mic; I used a Cascade Fat Head II.

    I ended up using that combination on all of the electric guitar tracks, it sounded positively huge.

    Below is the song I did the reamping for, it's not a final mix or anything just the raw tracks panned and leveled out.

    Last edited by TwilightOdyssey; 07-03-2017, 08:42 PM.
    Why don't you take your little Cobra Kais and get outta here?!
    My collaborative PROGRESSIVE ROCK PROJECT, As Follows.

  • #2
    Re: Finally got a grip on my Weber Alnico speaker

    Sounds very good indeed!

    Comment


    • #3
      Re: Finally got a grip on my Weber Alnico speaker

      Which Weber model is it?

      Comment


      • #4
        Re: Finally got a grip on my Weber Alnico speaker

        Originally posted by Vasshu the humanoid typhoon View Post
        Sounds very good indeed!
        Thanks!
        Why don't you take your little Cobra Kais and get outta here?!
        My collaborative PROGRESSIVE ROCK PROJECT, As Follows.

        Comment


        • #5
          Re: Finally got a grip on my Weber Alnico speaker

          Originally posted by Darg1911 View Post
          Which Weber model is it?
          12A-125, 8 Ohm. Like most speakers it is happiest when pushed. The web site says it is rated for 20W, but it said 15W when I bought it.
          Why don't you take your little Cobra Kais and get outta here?!
          My collaborative PROGRESSIVE ROCK PROJECT, As Follows.

          Comment


          • #6
            Re: Finally got a grip on my Weber Alnico speaker

            Sounds good.

            Comment

            Working...
            X