So a couple of days ago I noticed that my guitar would not be audible when I was using the bridge pickup, then I noticed that the volume knob was loose. However the sound would be normal when I switched to middle and neck position. I removed the knob and opened the cavity from behind today to tighten it, but now the sound is almost completely gone. Now there is only sound when in middle and neck position, but it is really weak, even when the distortion is all the way up. Any idea what the problem could be?
Announcement
Collapse
No announcement yet.
Can't hear my guitar at all, help please ..
Collapse
X
-
Re: Can't hear my guitar at all, help please ..
Then I guess I will try and take pictures of the other ones. I thought it was this one because it was the one being loose, and it also looked like 2 of the 3 pins or whatever they are had something attached to it, but the other one was empty.
or should I remove the bridge pickup?Last edited by Χάρης; 06-20-2019, 03:11 PM.
Comment
-
Can't hear my guitar at all, help please ..
The bits I can see the solder doesn’t look great but if it worked until now it might be ok. Can’t really see all the lugs of the switch which is one of the places I would suspect.
You just have a master volume and master tone, right?
Tone controls don’t use all 3 lugs. One lug should be empty or clipped off.Last edited by beaubrummels; 06-20-2019, 09:42 PM.
Comment
Comment