can someone give me a link to a reliable online store that sells a bias tool thats decently good?
Announcement
Collapse
No announcement yet.
Where can i get a good bias tool?
Collapse
X
-
I didn't check first, but if you go to accessories on Ebay and type in bias tool, something should come up.
I bought mine on there for $15-$20. I bought the mA version
and use it with my volt/ohm meter.
I make sure 6L6's are around 32mA
and El-34's are around 36-42mA
I make sure the tubes stay around those numbers, but
go by ear till the amp sounds it's healthiest.Originally posted by Boogie BillI've got 60 guitars...but 49 trumpets is just...INSANITY! WTF!
-
how would ya use one of these?
Comment
-
buy from an expert.... weber has a really nice bias probe for sale
i like mine
if you have a multimeter already, you can just buy the adapter head.
Comment
-
Originally posted by HolyDirt
http://cgi.ebay.com/ws/eBayISAPI.dll...category=43375
how would ya use one of these?
Comment
-
Originally posted by HolyDirt
http://cgi.ebay.com/ws/eBayISAPI.dll...category=43375
how would ya use one of these?
To bias an amp with that tool, you...
Have the chassis on a bench with books or something to support it. Have a guitar plugged in, and a speaker cab plugged in.
Put the new power tubes in, with the bias tool in between one of them,and the chassis.
Plug the bias tool into your volt/ohm meter, set on mA
Turn the amp on, and make sure 6L6's read around 32mA
and EL-34's around 38mA.
Start strumming the guitar with one hand, with your right hand on a mini screwdriver, to adjust the bias pot inside your amp's chassis. Turn it very sparingly, making sure to keep the number close to the numbers I listed.
When the amp sounds boldest, most articulate and healthiest on both of your amp's channels, AND is pretty close to those numbers, try moving the bias tool to another tube, just to make sure all 2 or 4 are running at the same mA.
This process can take about 1/2 an hour, till your amp sounds it's best. MAKE SURE you don't touch anything inside the chassis while you're doing this. The Current is LETHAL in a tube amp.
If you end up looking like Yosemite Sam, DON'T sue me!Originally posted by Boogie BillI've got 60 guitars...but 49 trumpets is just...INSANITY! WTF!
Comment
-
You'll have to excuse me guys, but I'm new to this biasing thing. Do you just bias power tubes, or do you bias pre-amp tubes as well?
Also, I'm prepared to spend a decent amount of money for a good bias tool, but I really don't know what to look for in one. I'm confused by the bias rite things on the weber vst website.Originally posted by kevlar3000I learned a long time ago that the only thing that mattered regarding tone was what my ears thought.Originally posted by ZerberusBetter is often the enemy of goodOriginally posted by ginormousCovers feed the body, originals feed the soul.
Comment
-
On Ebay, some guys are selling that two sided tube socket with a wire dangling off it. They go for around $20, but you'll also need a volt/ohm meter. You can get those at radio shack or Sears.
I have a mA version. The Voltage version is good too, but I like to know the current, so I don't turn the plates red accidentally by
turning the bias pot too far in one direction.
Only power tubes need biasing. Pre tubes all sound a little different, so you buy those by brand, but don't need to adjust anything.Originally posted by Boogie BillI've got 60 guitars...but 49 trumpets is just...INSANITY! WTF!
Comment
-
Originally posted by the_Chris
You'll have to excuse me guys, but I'm new to this biasing thing. Do you just bias power tubes, or do you bias pre-amp tubes as well?
Also, I'm prepared to spend a decent amount of money for a good bias tool, but I really don't know what to look for in one. I'm confused by the bias rite things on the weber vst website.
Comment
-
Yeah, I'd like to have one of those Bias Kings!
If you figure that buying those tools and learning to do it yourself will cost about the same as paying a tech, you'll save money,
not to mention learning more about tubes.Originally posted by Boogie BillI've got 60 guitars...but 49 trumpets is just...INSANITY! WTF!
Comment
-
I was checking on eBay and the BiasTool looks really simple to me. Does anyone have one and would care to comment on their experience with it?
I'm gonna be ordering some new tubes very soon so this would be very useful.
As always, thanks for helping me out : )Originally posted by kevlar3000I learned a long time ago that the only thing that mattered regarding tone was what my ears thought.Originally posted by ZerberusBetter is often the enemy of goodOriginally posted by ginormousCovers feed the body, originals feed the soul.
Comment
-
Originally posted by the_Chris
I was checking on eBay and the BiasTool looks really simple to me. Does anyone have one and would care to comment on their experience with it?
I'm gonna be ordering some new tubes very soon so this would be very useful.
As always, thanks for helping me out : )
Comment
-
Sweet.. thanks!
God I love these new smileysOriginally posted by kevlar3000I learned a long time ago that the only thing that mattered regarding tone was what my ears thought.Originally posted by ZerberusBetter is often the enemy of goodOriginally posted by ginormousCovers feed the body, originals feed the soul.
Comment
-
I have a prehistoric "Accu-bias" that I got from some long-forgotten place called the Tube Farm back around '93.
If you are strapped for cash, or just prefer DIY, Hoffman amps has instructions on making a bias probe, and sells the parts. You'll need a $2 socket, shielded cable at $.30 a foot, and a banana plug.
bias probe instructions"music heals"
facebook
Comment
Comment