Is there a reason for it, historically or otherwise? Is there some benefit to daisy chaining from my tuner as opposed to straight from my DC brick?
Announcement
Collapse
No announcement yet.
Why do so many floor-based tuners have DC-Out?
Collapse
X
-
Re: Why do so many floor-based tuners have DC-Out?
I have been using a tuner as my power supply for a long time , and yes it removes the brick from your board. Can't power 18v or 12v pedals is the downside.Originally posted by OinkusI had Big Flannel over here the other night , cleaned up his Tele and did some setup on it , took out the camera and set it down on the desk. I am easily distrac
-
Re: Why do so many floor-based tuners have DC-Out?
Originally posted by Oinkus View PostI have been using a tuner as my power supply for a long time , and yes it removes the brick from your board. Can't power 18v or 12v pedals is the downside.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: Why do so many floor-based tuners have DC-Out?
Originally posted by dystrust View PostGround loops are another potential downside. Any decent power supply will have isolated outs, whereas everything on a daisy chain shares a common ground.
I think the power out jack was brought into pedal parlance for the daisy chain, before power bricks and the like were in common use.Originally posted by crusty philtrum...Gimme a call when it's time to take 'em out. I don't have a gun, but i have a very sharp pointy stick and enough negativity to take out a small country...Originally posted by SecurbThe only blackmachine I care about is sitting in my jeans.
Comment
-
Re: Why do so many floor-based tuners have DC-Out?
Originally posted by trevorus View PostUnless they pedals have isolated jacks and likely isolation circuitry, they do through the signal chain as it is. It's more a ground loop issue.
I think the power out jack was brought into pedal parlance for the daisy chain, before power bricks and the like were in common use.
Agreed re: reason for the power out. I don't know how long isolated supplies have been available, but the Boss PSM-5 (daisy chain power supply & master switch) has been available since 1983.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: Why do so many floor-based tuners have DC-Out?
I've used a Pedal Power and a One Spot for many years now. Never had a problem with ground loops.Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone.
Comment
Comment