banner

Announcement

Collapse
No announcement yet.

ArtieToo help! ! !

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fatigueofheart
    replied
    Re: ArtieToo help! ! !

    yup...that is essentially what i did. Again, thanks for your time! ! !

    Leave a comment:


  • ArtieToo
    replied
    Re: ArtieToo help! ! !

    I think that will work. (If it does, it does.)

    I was going to post this:



    I think, thats the type of switch you have.

    Artie

    Leave a comment:


  • fatigueofheart
    replied
    Re: ArtieToo help! ! !

    hey man! ! ! thank you so much! ! you too jeremy! ! i got it working so don't worry about it..... i soldered the second 2,3 lug to the tone pot and brridge the first 3 to the first 0 lug. Thanks again guys! ! !
    Last edited by fatigueofheart; 10-19-2004, 08:20 PM.

    Leave a comment:


  • ArtieToo
    replied
    Re: ArtieToo help! ! !

    Use this diagram as a reference. That should make it clear.

    If not, ask.

    Strat tone connections

    Artie

    Edit: Ooops . . . you have a different type of 5-way. Let me think a sec . . .

    Leave a comment:


  • fatigueofheart
    replied
    Re: ArtieToo help! ! !

    bump...:-/

    whuch lug willl it be?? the switch is like this btw.....

    0 1 2 3 0 1 2 3
    B M N V g

    B=Bridge hot
    M=Middle hot
    N= neck hot
    V= to volume pot
    g= gorunded on volume pot chasis
    Last edited by fatigueofheart; 10-19-2004, 07:13 PM.

    Leave a comment:


  • fatigueofheart
    replied
    Re: ArtieToo help! ! !

    hey...thanks jeremy! ! 1 but i'm not really sure which lug is for which on the switch...can you post a quick pic? thanks again! !

    Leave a comment:


  • jeremy
    replied
    Re: ArtieToo help! ! !

    you run the tone control off only the middle and neck lugs of the switch instead of the volume pot

    Leave a comment:


  • fatigueofheart
    started a topic ArtieToo help! ! !

    ArtieToo help! ! !

    hey man! can you or anybody on this board tell me how to wire my guitar SSS in which the tone control is disabled for the bridge pickup? The guitar has 3 singles, a tone and volume and a fiveway. Thanks in advance!
Working...
X