Wiring problem lil 59 Please help

[Tomguitarist]

Hi,
I’m newbie and need some help. I have just bought a Seymour Duncan little 59 pickups set (only neck and bridge) and I would like to put (Fender Texas Special Single Coil) in the middle . My question is how to mix little 59 (n and b) with this pickup in the middle. I have already installed : 1 volume A250K push/pull ,5 way Fender switch and 2x tone B250K. I ‘d like all the little 59 (n&b) pickups were hum-canceled by the 1 volume push/pull potentiometer. Could you help me with wiring process. Diagrams would be really helpful
because unfortunately none of Seymour’s wiring diagrams match my example.
Please help

[GuitarDoc]

Re: Wiring problem lil 59 Please help

I'm not sure exactly what you are asking for, but here is a very good diagram. Does this do what you want? You don't need a push/pull with this scheme. All switch positions will be hum cancelling except position #3, the middle single coil pup by itself.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=lilhum_sing_lilhum_1v_2t_s

[Tomguitarist]

Re: Wiring problem lil 59 Please help

Thanks for the wiring diagram. But it is not exactly what I want. I would like to have a push/pull pot in my Fender strat, and I'm wondering how should I solder wires from 2 lil59 pickups to only one push/pull pot. So that I will have :
Push/pull up - all 2 lil 59 pickups (bridge,neck) are singlecoils
Push/pull down -all 2 lil 59 pickups (bridge,neck) are humbuckers
Don't forget that apart from that I have a Fender pickup in the middle. I heard that there are some phase issues when mixing Seymour's and Fender pickups. Is it true ? If so what should I do to avoid that problem.
Thanks
Sorry for my english - I'm a foreigner

[GuitarDoc]

Re: Wiring problem lil 59 Please help

Your English is just fine.

OK. Use the first diagram that I gave you, but instead of running the red and white wires to the switch, run them to the push/pull like in this diagram...

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w_1pp

That will give you manual control over split or series humbucker mode.

For the middle Fender pup, just reverse the wiring connection for the black and white wires.

[Tomguitarist]

Re: Wiring problem lil 59 Please help

Thanks for your help.
Could you please look and check if my wiring diagram is done properly.
It is based on a Seymour's diagram because I don't have time to draw one by myself.
https://dl.dropbox.com/u/97363233/Pickups/1.jpg
Is my idea worth to do , please comment.

[hermetico]

Re: Wiring problem lil 59 Please help

It seems ok to me

[GuitarDoc]

Re: Wiring problem lil 59 Please help

Looks good.

[Tomguitarist]

Re: Wiring problem lil 59 Please help

Thanks
Finally I am ready to start soldering.

I will write if something goes wrong.