Master series/parallel and phase switch diagram

[Isaac.t]

Hi all
Im after a wiring diagram for this setup 2 humbuckers 2 volumes 2 tones and a 3 way toggle
Switch i want to use mini toggles for a master series/parallel setup with a phase switch for the neck pickup. I have 4 conductor Humbuckers two tOnerider classic alnico ii

All help would be much appreciated
Cheers

[GuitarDoc]

Re: Master series/parallel and phase switch diagram

Have you checked the wiring diagrams on the SD site?

What a silly question...of course you haven't. But here's what you want:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h2v2t3w2sp

If you want to use mini toggles, they are wired the same. If you want one toggle to do what the two push/pulls do, I believe you will need a 4 pole switch instead of the two two pole switches.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_2t_3w_phase

This shows the phase switch connected to the bridge pup instead of the neck pup. It doesn't matter which pup is connected to the phase switch but you can wire it to the neck pup if you want.

[orpheo]

Re: Master series/parallel and phase switch diagram

If you want to switch between series and parallel on bith pickups with 1 switch you will be needing a 4 pole 2 way.

[GuitarDoc]

Re: Master series/parallel and phase switch diagram

Deja vu.

[orpheo]

Re: Master series/parallel and phase switch diagram

Deja vu.

Sorry you are right. Must have missed that bit...

[Isaac.t]

Re: Master series/parallel and phase switch diagram

Have you checked the wiring diagrams on the SD site?

What a silly question...of course you haven't. But here's what you want:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h2v2t3w2sp

If you want to use mini toggles, they are wired the same. If you want one toggle to do what the two push/pulls do, I believe you will need a 4 pole switch instead of the two two pole switches.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_2t_3w_phase

This shows the phase switch connected to the bridge pup instead of the neck pup. It doesn't matter which pup is connected to the phase switch but you can wire it to the neck pup if you want.

Does it matter which toggle comes first series/parallel before phase? Also with the 4pole 2way im guessing on on?

[Isaac.t]

Re: Master series/parallel and phase switch diagram

And im guessing bOth pickups are wired to the same poles for series/parallel master?

[GuitarDoc]

Re: Master series/parallel and phase switch diagram

Sorry you are right. Must have missed that bit...

It's ok, maybe it was worth repeating.

[orpheo]

Re: Master series/parallel and phase switch diagram

What do you mean the same poles? Physically the same or same orientation? The latter.

@guitar doc.nah. i just didnt read that carefully haha