Ibenez RG Wiring

[rudiekazu]

Hey guys....
I have a Ibenez RG series ax with a 3 pickup config. 2 double Infinities in the Bridge and Neck position and another Singel Coil Infinitie in the middle. It only has a 1 volume and 1 tone controls. I purchased a pair of SD Humbuckers (SH2 & SH4) for the Neck and Bridge and a single coil Quater Pound SD Strat pickup for the middle.
I looked at the wiring diagram page and couldnt find anything for this config or Ibenez in general....or I'm retarted........or both. I was wondering if anyone could help me with a wiring diagram.
Thanxz.......Ron

[rudiekazu]

Re: Ibenez RG Wiring

I forgot to mention it has a 5way switch....

[LonePhantom]

Re: Ibenez RG Wiring

Use this DiMarzio wiring diagram and you should be able to get there. Substitute the DiMarzio red wire for the SD black wire, and the black and white DiMarzio for the red and white SD and you should get there.

http://www.dimarzio.com/sites/default/files/diagrams/RG270,350-2HB1VV2.pdf

[ehdwuld]

Re: Ibenez RG Wiring

select the link in my signature
you may have to go thru a few different model years
as they dont update them unless something changes

oh and you will have to convert to the SD wiring colors

your switch should look like this
I have marked it for mine


you can have it to where
you have
neck hum
neck split + mid single
mid single
bridge split + mid single
bridge hum
edit
by bringing the bridge red/white combination to terminal 5
ground to terminal 6
and neck red/white to terminal 7
counting from the left on the picture

or go with the standard strat wiring
and a push-pull for splits
which is what i did