Need some Dimarzio HH Wiring help please :)

[frankencat]

I have a set of 36th anniversary pickups that I am installing in an ESP Eclipse. I am wiring in a DPDT switch to turn off one of the coils on both pickups. If I do it the standard way - black and white to ground - will the middle position be hum-cancelling or do I have to flip one of them and if so, what is the wiring scheme?

This looks like the diagram and it shows the neck flipped with red&green going to the "tap" switch and white to hot (vol pot) and black to ground. IS this diagram correct for what I am after?

http://www.dimarzio.com/sites/default/files/diagrams/2h2v1pptsplit_3w_all.pdf

Thanks -Frank

[hermetico]

Re: Need some Dimarzio HH Wiring help please

Try this:

One pickup:
Red -> hot
White & Black -> to pull/push switch (to be shorted to ground)
Green & bare -> ground

The other pickup
White -> hot
Red & Green -> to pull/push switch (to be shorted to ground)
Black -> ground

[GuitarDoc]

Re: Need some Dimarzio HH Wiring help please

+1