Extrem wiring help needed on HSH setup

[rheidenbluth]

Hi guys,

seems to be the right forum to answer my question.

My guitar is like this:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=HSH_1v_1t_5w

Then I put in SH-2 and SH-4 with coil splitting each humbucker with it's own micro switch:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=coil_splitting

I like to keep the possibilities as they are now, but do I have any chance to have additionally both humbuckers
and all three pickups running, for example with a third micro switch?

Looking forward to your answers

[ArtieToo]

Re: Extrem wiring help needed on HSH setup

Like this:



When the 5-way is in the bridge/middle position, the switch will add the neck.

[ArtieToo]

Re: Extrem wiring help needed on HSH setup

Ok, that should be half of the work done, thanx ArtieToo.

With an on/off-on-on switch:

1st : Nothing --> normal operation
2nd: The pic above --> All three pups running
3rd : The 2 HB's without the SC should run ...

I guess, if the neck HB is running, the third position should add the bridge HB, also vice versa.

I want to make sure we're on the same page. What I posted above does exactly that, however, you manipulate those modes with the 5-way. So, 5-way in bridge position will give you both HB'ers. 5-way in bridge/middle position will give all three. Switch "off" is normal operation.

Now, if you want those three modes to override the 5-way, that's a whole 'nother animal.

[rheidenbluth]

Re: Extrem wiring help needed on HSH setup

Thanks very much ArtieToo, I think I understood now. So a simple on/off switch does it all.