Re: Need some help for my double-neck Strat circuit
Hi; I need help with a VERY confusing wiring problem:
I'm building a double-neck Strat with a 6 string guitar neck and a 4 string bass neck. The guitar side has the "standard" 3 single coil p.u.'s; the bass side has a p-bass pair of p.u.'s in the neck position and a jazz p.u. in the bridge position. For controls I have the "standard" Strat control set-up: V, T, T2 pots and a 7 pole 5-way selector switch. For switching between the necks I have a 3-way toggle switch placed between the necks. My problems are this: 1) HOW do I wire in the 3-way switch so that it works as a neck switch? 2) where and HOW do I wire in the 3 single coils?? In order to USE the 3-way switch, they AND the bass p.u.'s have to be wired TO it; but it's the kind of 3-way with one "ground" tab/pole at one end and 4 tabs at the other: not enough tabs to connect all 3 single coils so that they can be separated LATER down the wiring "chain" for the regular Stat separation AND to connect the bass p.u.'s 3) HOW do I wire it so that the 3 pots work for BOTH the 3 single coils AND the bass p.u.'s?? NONE of the p.u.'s are wired to anything yet, altho the grounds for everything ARE connected. HELP!!! And PLEASE, considering how confusing this all is, a diagram would DEFINITELY help!! I'm sorry, I could only upload/attach the one diagram. HELP!!
Hi; I need help with a VERY confusing wiring problem:
I'm building a double-neck Strat with a 6 string guitar neck and a 4 string bass neck. The guitar side has the "standard" 3 single coil p.u.'s; the bass side has a p-bass pair of p.u.'s in the neck position and a jazz p.u. in the bridge position. For controls I have the "standard" Strat control set-up: V, T, T2 pots and a 7 pole 5-way selector switch. For switching between the necks I have a 3-way toggle switch placed between the necks. My problems are this: 1) HOW do I wire in the 3-way switch so that it works as a neck switch? 2) where and HOW do I wire in the 3 single coils?? In order to USE the 3-way switch, they AND the bass p.u.'s have to be wired TO it; but it's the kind of 3-way with one "ground" tab/pole at one end and 4 tabs at the other: not enough tabs to connect all 3 single coils so that they can be separated LATER down the wiring "chain" for the regular Stat separation AND to connect the bass p.u.'s 3) HOW do I wire it so that the 3 pots work for BOTH the 3 single coils AND the bass p.u.'s?? NONE of the p.u.'s are wired to anything yet, altho the grounds for everything ARE connected. HELP!!! And PLEASE, considering how confusing this all is, a diagram would DEFINITELY help!! I'm sorry, I could only upload/attach the one diagram. HELP!!
Comment