Guys could you please sanity check this diagram for an HSH P-rails with Triple shots & Classic Stack Plus?
1. Position 1: Bridge P-Rail (rail facing bridge) through Triple Shots
2. Position 2: Bridge P-Rail (rail facing bridge) through Triple Shots + Classic Stack Plus (split to hum-cancel with neck P-rails P-90)
3. Position 3: Classic Stack Plus
4. Position 4: Neck P-Rails (rail facing neck) through Triple Shots + Classic Stack Plus (split to hum-cancel with bridge P-rails rail)
5. Position 5: Neck P-Rails (rail facing neck) through Triple Shots
6. Volume push-pull pot phase-switches neck P-rail
7. Tone push-pull pot forces neck P-rail on (for neck/bridge or all pickups on combinations)
8. Bridge P-rail is wired to Triple Shots with 'reverse wiring' so that slug/adjustable selection is pointing towards corresponding side
EDIT: This is incorrect:9. Bridge triple-shot black/white wires going to pickup switch are reversed to ensure hum-canceling with neck p-rails (rails with rails, P90s with P90s)
This is a first project I am currently working on, based of a nice ash body Ibby RG. Any comments or ideas are most welcome!
UPDATED DIAGRAM:
Thanks
Zac
1. Position 1: Bridge P-Rail (rail facing bridge) through Triple Shots
2. Position 2: Bridge P-Rail (rail facing bridge) through Triple Shots + Classic Stack Plus (split to hum-cancel with neck P-rails P-90)
3. Position 3: Classic Stack Plus
4. Position 4: Neck P-Rails (rail facing neck) through Triple Shots + Classic Stack Plus (split to hum-cancel with bridge P-rails rail)
5. Position 5: Neck P-Rails (rail facing neck) through Triple Shots
6. Volume push-pull pot phase-switches neck P-rail
7. Tone push-pull pot forces neck P-rail on (for neck/bridge or all pickups on combinations)
8. Bridge P-rail is wired to Triple Shots with 'reverse wiring' so that slug/adjustable selection is pointing towards corresponding side
EDIT: This is incorrect:9. Bridge triple-shot black/white wires going to pickup switch are reversed to ensure hum-canceling with neck p-rails (rails with rails, P90s with P90s)
This is a first project I am currently working on, based of a nice ash body Ibby RG. Any comments or ideas are most welcome!
UPDATED DIAGRAM:
Thanks
Zac
Comment