Hi everyone, I'm having some issues with my new setup. I have an American Strat. I just bought a DiMarzio Super Distortion S pickup for my bridge (it has 4 wires plus bare ground wire). I have a SD SSL-5 in the neck and an SD SSL-1 (RWRP) in the middle. I finally figured out how to install the DiMarzio to cancel any hum in the 4th position using the attached diagram. However, my 4th position sounds very bright/thin and low in volume, which makes me feel like the DiMarzio Super Distortion and the SSL-1 (RWRP) are out of phase. How can I go about fixing this? I do also have an SD SSL-1 (non RWRP) which I'm not using. Not sure if that could somehow fix my problem. I obviously cannot just switch my middle and neck positions as one is an SSL-1 and the other is SSL-5. Any advice would be appreciated. If someone has a diagram that would be applicable to this scenario that would be helpful. I'm basically trying to set it up so it's hum cancelling at positions 2 and 4, and none of the pickups are out of phase with each other.
Thanks,
Thanks,
Comment