wiring dimarzios to duncs

[dc_mally]

hey, i got a guitar recently, and it came with dimarzios (nice surprice as i was expecting EMG-HZs or Dunc designed, was from a shop miles away, thats why i wasnt sure)

so i want to take the bridge dimarzio out and put my dimebucker in, i have looked at the dimarzio and duncan wiring diagrams and neither seem to match with what is wired in my guitar.

The gutiar has H-S-H 1 tone 1 vol, and a 5 way switch

i drew a diagram of the humbuckers wiring up, i forgot the single coil in the diagram but that shouldnt be important.

how do i need to wire it to get the duncan in instead of the bridge humbucker??



Thanks,
Dave.

[dc_mally]

Re: wiring dimarzios to duncs

i have had a look further, and i think this is it.. is it??

[mnbaseball91]

Re: wiring dimarzios to duncs

Switch the black and red wires.

[ArtieToo]

Re: wiring dimarzios to duncs

Basically:

Duncan . . . DMZ
green . . . . green
red . . . . . .white
white . . . . black
black . . . . red

[dc_mally]

Re: wiring dimarzios to duncs

mnbaseball91 and ArtieToo, your advice conflicts, the wiring i did on the diagram goes with the ArtieToo conversion, you have to keep in mind i did the white wires in blue which isnt entirely clear on the dimarzio bit.

mnbaseball91 is your advice to reverse the polarity??

[XSSIVE]

Re: wiring dimarzios to duncs

artie is right with his colors...i just installed a duncan neck and dimarzio bridge in one of my guitars.

-Mike

[mnbaseball91]

Re: wiring dimarzios to duncs

mnbaseball91 and ArtieToo, your advice conflicts, the wiring i did on the diagram goes with the ArtieToo conversion, you have to keep in mind i did the white wires in blue which isnt entirely clear on the dimarzio bit.

mnbaseball91 is your advice to reverse the polarity??

It would appear that it does.

Go with his. Switching those two fixed the problem when I was wiring up my Dimarzio using a SD diagram, but listen to the other guy since he's probably right.