Please Help Identify Pickup - Photo/Ohms Provided

[NoMoreMKIV]

Hi-

I've got a single position hum-canceling Seymour Duncan from the bridge position of a G&L Legacy. There's a sticker on it that says 1NC (I've seen elsewhere in this forum that this might just be initials of person who made/tested it?).

Individual pole pieces, 4 wires (red/white tied together, black & green free), says Seymour Duncan on it.

When I measure DC resistance on black/green wires, I get almost exactly 10.0Kohm.

I've posted a photo at http://students.washington.edu/silverst/pickup.jpg if that helps anyone.

Thanks in advance!

[John Wymore]

Re: Please Help Identify Pickup - Photo/Ohms Provided

Most likely a Lil "59" neck position. Could possibly be a JB jr. but according spec they are a little lower resistance than the "59".

[BS123]

Re: Please Help Identify Pickup - Photo/Ohms Provided

I'd say it's a JB Jr. neck/middle position. That's going by the chart on the Duncan site.

Chart

[NoMoreMKIV]

Re: Please Help Identify Pickup - Photo/Ohms Provided

Is it unreasonable to think that someone might have had this pickup in the bridge position?

[beandip]

Re: Please Help Identify Pickup - Photo/Ohms Provided

no, alot of people use the "LiL' series neck position pickups in the bridge, mostly because it usually balances better w/ lower output single coils.

[BS123]

Re: Please Help Identify Pickup - Photo/Ohms Provided

Is it unreasonable to think that someone might have had this pickup in the bridge position?

Nope, I say use'em where you like'em....