Good Karma Thread

[Andrew Lamprecht]

Re: Good Karma Thread

pmed for jackson pup

[John E Rokker]

Re: Good Karma Thread

-4 rubber feet for amp or cabinet with 2 different screw types.
-Jackson JH-1 Pickup with 5" of lead
-APC Persuader Lead pickup (shield wire missing)

[The Dali]

Re: Good Karma Thread

PMs responded!

Looking for 4 Telecaster bridge mounting screws if anyone has them. Thanks!

[FretFire]

Re: Good Karma Thread

PM sent on the BWB Tele guard. Uploading pics of items I have now.

EDIT: Here's what I've got. Two sets of chrome strap buttons, pair of flat top chrome barrel knobs, and a chrome neck plate w/ screws.

EDIT 2: Neck plate and knobs are gone.

EDIT 3: All of it is gone, thanks!

[brunogio]

Re: Good Karma Thread

Gibson Gigbag HAS BEEN CLAIMED

[IndySG]

Re: Good Karma Thread

PM sent...

[John E Rokker]

Re: Good Karma Thread

Dimarzio Fred F-spaced. -Taken

[Franknfilms]

Re: Good Karma Thread

PMs sent to EEF13 and The Dali.

[The Dali]

Re: Good Karma Thread

Agileguy -the 3-way and jacks are on their way.

[King IzzO)))]

Re: Good Karma Thread

Nope, fender screws no fit.

*edit* haha, they sell replacements, yay! I'm gonna use them after all.

[The Dali]

Re: Good Karma Thread

Update!


- Strat SSS white pickguard
- Telecaster BWB pickguard
- Telecaster WBW pickguard
- Strat SSS shield TAKEN
- Three white trem covers. These are imports (ie, screw spacing)
- Squier Neckplate. No screws TAKEN
- Fender Highway 1 Tele bridge with hardware (a little rusty)
- Pair of mini-humbucker rings TAKEN
- Four Seymour Duncan single-coil covers (three are bright white, one is yellowy)
- two black single-coil covers (no holes) TAKEN
- Gibson USA trussrod cover
- import 5-way switch TAKEN
- Bournes 500k push-pull pot (new) TAKEN
- 2 Strat input jacks TAKEN
- strat VTT knobs (very relic'd yellowed) TAKEN
- 4 black slector switch tips for Strat. One White
- White strat trem-bar tip
- 10 Fender-issued caps (.047)
- 6 HUGE caps for single-coils (.047). They are likely for amps... I bought and didn't notice the size
- SX Gigbag TAKEN

[bungalowbill]

Re: Good Karma Thread

Eh, graphtech saddles I got from Bungalowbill take funny sized screws that I don't have and the plain neck plate I got from Dali won't work with my Jackson neck, so both are available again.

I've also got a Fender 6 hole trem, minus saddles, might be mexican, not sure, I can measure if someone wants it, I robbed the saddles for mah tele.

I've got a couple 3 way blade switches and a 5 way blade non-superswitch.

They should work with standard Fender saddle screws IIRC....sorry they didn't work for you.

[King IzzO)))]

Re: Good Karma Thread

Eh, graphtech saddles I got from Bungalowbill take funny sized screws that I don't have and the plain neck plate I got from Dali won't work with my Jackson neck, so both are available again.

I've also got a Fender 6 hole trem, minus saddles, might be mexican, not sure, I can measure if someone wants it, I robbed the saddles for mah tele.

I've got a couple 3 way blade switches and a 5 way blade non-superswitch.

[Agileguy_101]

Re: Good Karma Thread

Are you looking for a fender 3-way or a gibson 3-way?

Gibson-type 3 way toggle.

[The Dali]

Re: Good Karma Thread

PM incoming The_Guitar

If anyone has a three way switch, an output jack, or any kind of halfway decent tuners, I need those. Got a cool project in mind.

Are you looking for a fender 3-way or a gibson 3-way?