Tweet
I have quite a few pickups sitting around that I made for doing demos and comparisons with. Now that I've decided which ones I want in my guitars, I still have several left over. These are all hand wound by me. The higher priced ones are posted first.
1) "Full Range Humbucker" neck pickup. I actually have two of these but one doesn't already have a cover wax potted on it like the pictured one.
Info: These is the only ones COMPLETELY wound by hand I have. It is much different than a Wide Range Humbucker, despite its appearance. It sounds similar to a Strat neck pickup but with no hum and a bit more relaxed treble peak.
Resistance: 6.1K
Inductance: 2.6H
Cost: $100 shipped (the most expensive one I'm selling by far because its not just scatter-wound, but wound completely by hand. It took around 12 hours of just winding.)
Audio Clip: https://soundcloud.com/macbradley2424/full-range-neck
2) High Output Alnico 8 Telecaster Bridge pickup
Info: As much 42 AWG wire as I could fit onto a a tele pickup with A8 magnets. Its hot and the low mids are very noticeable, but still has single coil like attack. Fun pickup for crunch/distortion, or anything not needing sparkly cleans.
Resistance: 12.1K
Inductance: 7.2H
Cost: $45 shipped
4) Strat Neck Pickup
Info: A Strat neck pickup made with single build wire, so its slightly less bright than a 50's strat pickup.
Resistance: 6.2K
Inductance: 2.5H
Cost: $30 shipped
5) Strat .25" magnet pickup
Info: A Strat pickup wound with thicker rod magnets and also wound hotter than stock.
Resistance: 7.5K
Inductance: 3.8H
Cost: $40 shipped
6) Alnico 8 Strat pickup
Info: Over-wound a fair amount and more low mids with A8 magnets.
Resistance: 9.0K
Inductance: 4.4H
Cost: $40 shipped
1) "Full Range Humbucker" neck pickup. I actually have two of these but one doesn't already have a cover wax potted on it like the pictured one.
Info: These is the only ones COMPLETELY wound by hand I have. It is much different than a Wide Range Humbucker, despite its appearance. It sounds similar to a Strat neck pickup but with no hum and a bit more relaxed treble peak.
Resistance: 6.1K
Inductance: 2.6H
Cost: $100 shipped (the most expensive one I'm selling by far because its not just scatter-wound, but wound completely by hand. It took around 12 hours of just winding.)
Audio Clip: https://soundcloud.com/macbradley2424/full-range-neck
2) High Output Alnico 8 Telecaster Bridge pickup
Info: As much 42 AWG wire as I could fit onto a a tele pickup with A8 magnets. Its hot and the low mids are very noticeable, but still has single coil like attack. Fun pickup for crunch/distortion, or anything not needing sparkly cleans.
Resistance: 12.1K
Inductance: 7.2H
Cost: $45 shipped
4) Strat Neck Pickup
Info: A Strat neck pickup made with single build wire, so its slightly less bright than a 50's strat pickup.
Resistance: 6.2K
Inductance: 2.5H
Cost: $30 shipped
5) Strat .25" magnet pickup
Info: A Strat pickup wound with thicker rod magnets and also wound hotter than stock.
Resistance: 7.5K
Inductance: 3.8H
Cost: $40 shipped
6) Alnico 8 Strat pickup
Info: Over-wound a fair amount and more low mids with A8 magnets.
Resistance: 9.0K
Inductance: 4.4H
Cost: $40 shipped
Comment