Recent content by alex73013

I have an Electromatic Jet. I removed the treble bleed from the master volume. I usually keep the individual volumes all the way on 10 and just the master volume to adjust the volume. The treble bleed may have been to strong when I had it and maybe I would have preferred one of the adjustable...

Where does the resistor go in relation to the lugs on the pot and where do the lugs connect to? The following is the instructions for the mod but doesn’t fully explain it to the layman like myself. “Replace C1 with a 22n cap Replace R2 with a 22k to 25k potmeter (wired as a variable resistor)...

How do I add a clean blend mod to Crybaby Wah? I'm wanting to be able to dial in some of my clean sound while my wah is engaged. I'm using it with bass. I already modified the pedal to have three different capacitor selections so I can use it with both bass and guitar. Kinda wanting to retain...

Which is louder a 100w amp feeding two speakers or a pair of 50w amps into feeding their respective speakers? Maybe to make things more equal have the 100W amp feed a pair of 1x12 cabs and the 50W amps would each feed their own 1x12 cabs. With this scenario all amps dimed, same model speakers...

Hey, I was needing some basic information on how to wire a 12 position varitone. Do I connect a 10M resisistor to each position then add a cap to each one of the 10M resistors individually? And then does the single pole get connected to ground and the caps to hot or is it the other way around...

Do the Explorer and Flying V guitars retain the treble when you roll down the volume knob similar to Les Paul 50's wiring? I'm thinking about rewiring my Epiphone Les Paul Custom to have two volumes, master tone and a varitone. Please don't suggest using a treble bleed circuit.

Can someone help me with a diagram on how to wire a Humbucker to where when the push/pull pot is in the down position it is in parallel and when pulled it’s in series? Basically, I plan to be wiring a slightly dark sounding Humbucker in the neck position I’d like to brighten by making it wired...

I'm curious what people's take is on the current production of Epiphone LP Standards vs MIM Fender Strat Standards? I'm not looking to purchase either one of these but more interested in the debate and reasoning between these two guitars. I know they both sound, feel and play very differently...

Re: Lace Sensor Dually Help? I'll be covering the neck pickup hole with a sticker or something. I put aluminum tape to shield the cavity and then a piece of duct tape above it after I took this picture.

I want to wire a Lace Sensor Dually in an LP Junior style guitar and have the pickup wired like a Jazz Bass. North coil will go to one volume pot and then the South coil will go to another volume pot. Would I wire the orange wires to their respective pots then the other wires go to ground?

I have the EHX Mig 50 amp. It has an external bias. When I got it it read 80 ma. I was wondering if anyone has this amp and where they set their's. The EHX support said the recommended range is 62-65 ma.

I currently have a Rat pedal. I was seeing what people's opinions are of these pedal. I also have the Bass Big Muff but find I prefer the Rat. How would you compare the Rat to the NYC Big Muff and Ibanez 850. I found with the Muff's the lower gain settings below noon are a bit lacking. I kinda...

I play a short scale bass and tune as low as C but usually keep it in C# and sometimes as high as Eb. I don't know if anyone has come across this on one but it always seems like the lowest string is always the floppiest. I recently got the Rotosound 77 set with the 105 as the lowest and it's...

Which sized Tusq XL nut for Gretsch CVT? Gibson or Epiphone?

Can someone tell me where their internal trim pots are set on their JD-4S? Please don't tell me to set it by ear. I've been doing it for quite some time and am still having difficulty. Thanks.