Recent content by AlexS7320

Hi, got an old (has Schaller made in w.germany) custom build guitar; dont know who built it or when... The trussrod was normally adjusted by me, tightening with clockwork motion. Then the neck bend more backwards, as if string gauge had increased. If i try counter-clockwise, the nut of the...

Does anyone know, if the new PCB-Baseplate Blaze Humbucker only differs in the baseplate to the 'original' 1990 model or is the design also different (like putting zink inside gaps to compensate [virtualvintage]). many thanks

Hey there, I thought i tested that enough, but now there is a mess in that highly complex circuit: My neck Single coil is North and has variable non reverse and reverse wiring, since i can flip the cables..... The way i chose the cables of that neck Single coil it will be in Phase with the...

Hey there, is it fine to use only a single hair of copper wire instead of the whole cable type of wire that we use?

Hey there, the previous owner sanded the edges of that body very hard, so the wood is so raw at those spots, it takes in stain generously. The remaining surface was now sanded with a 80s + a block... This basswood is still ridicously smooth, i mean its a wonderful surface, bright and evenly...

Happy New Year Everyone! Is anyone here who has played a MDF guitar, with a differntiated perspective on it? Many Greetings!

Its about an 80's MDF-made Guitar. (i hope this composite material will sound better than plywood/Multiplex) I can only effort either one of them, so i cant make a comparison myself. In case the Dp161 doesn't sound any different to a Blaze, i would stop considering it. Many Greetings!

Hey, i know jon schaffer uses les paul for rhythm and strat for clean. Gibson stock or wcr or SDs on 'Stand alone' (bkp wasnt established then)? Or any other ideas... I could imagine a SH-8 on 'Disciples of the Lie' Greetings and Merry Christmas!

Hey there, i am utilizing H/S/S. Is there an option for a single coil, that will give a dirty bridge sound when installed in middle? i am majorly thinking about this song, which i guess is played with singles... is it possible to make a pickup in middle position sound like this PU from the song...

Hey, the top coil has north polarity in a humbucker (black to white cables [SDs]). My Neck Single Coil has north polarity too. Can i wire them parallel: normal-neck + White-to-Black->Ground, to get the desired result? Many Thanks in advance for dealing with this question!

There is a hot going to black. red n white r connected; green to ground. but white n red habe a capacitor to hot. How is the sound (mic setting) gonna be like?

Re: SH-8 in 5-way switch (1 humbucker only; Ibanez S7320) Today i tried solving the equation, but i was confused because most switch position of your consideration kicked alomst all the switch slots... so i just dont have the knowledge what wiring would lead to which effect ... ... (e.g. for...

Re: SH-8 in 5-way switch (1 humbucker only; Ibanez S7320) This was the switch from stock... ... could it be possible that i soldered mirror-inverted? and probably the ground soldering was not so nice, maybe cause i stacked the new on top of the old garbage... but just suggestion

Re: SH-8 in 5-way switch (1 humbucker only; Ibanez S7320) couldnt find a good cam... i noticed if i have the amp super loud i can hear some sound comin from the position before the silent position... (very very quite string sound between lots of noise while amp very loud[bridge], silent, no...

Re: SH-8 in 5-way switch (1 humbucker only; Ibanez S7320) Metalblaze, THANKS A LOT so far, I like the idea: 1-Full 2-Split 3-split 4-no sound 5-out of phase Now PLEASE TELL ME if this translation is correct: