Recent content by ctesoro

Re: Momentary Kill Switch GUITAR IS DONE THANKS - WIRED IT THE WAY ARTIE SUGGESTED A/C TO TIP/RING OF JACK - TOTALLY QUIET NO NOISES OR HUMS.

Re: Frankenstrat 3-way blade switch with Hot Rodded Humbuckers wiring help! GUITAR IS DONE - THANKS!

Re: Frankenstrat 3-way blade switch with Hot Rodded Humbuckers wiring help! ok almost there. only problem now is when select neck pup only and tap the coils with screwdriver it seems bridge pup is also on? I double checked all wiring and looks good. Any thoughts? see photos

Re: Frankenstrat 3-way blade switch with Hot Rodded Humbuckers wiring help! OK Thanks Again ArtieToo - I'll transpose what you sent or just wire it this way. Im having a tough time orienting the switch correctly. It seems the terminals are opposite from what you sent. Where the rutter contacts...

I've installed a switchcraft 903 momentary to use as a kill switch. It has 3-poles A-B-C. Anyone know how to translate this schematic to wire it correctly? See diagram 1-C.

Trying to wire a JB and Jazz 4-conductor with a 3-way blade switch in a frankenstrat. Position 1&3 standard neck & bridge humbucker. position 2 (middle) to split the outside coil of bridge and inner coil of neck so I can get a little of that strat twang while still canceling the hum. This...