Recent content by Edgecrusher

Adding resistors in parallel will change the resonant peak and if you move the resonant peak everything else moves a bit. It kinda has to doesnt it? When its in parallel you are shunting some signal to ground, it will effect the tone overall. This is also why you dont see the same tone changes...

You can do it that way, I just dont prefer it, it tends to reduce the output of the singles too much for me, it makes them hard to balance in an HSS set up. Its also a different sound as it effects it across the board instead of just taming highs. 2 different ways of skinning the same cat

An option you have with this is to add resistors in series to fine tune the response you want. Put the 500k pot back in then use resistors to tame them to your liking. Just make sure and add them in series with the tone pot, if you just put them on the hot wire coming out of the pickup it can...

That actually makes sense, thank you. The old one that fits tight is very difficult to adjust, a bit of play would relieve the binding.

Has anyone ever had a TOM that was loose on the studs? On my machete I went to replace the Gotoh TOM that was on there with another Gotoh TOM and the new bridge has definite slop on the studs, I checked and the old studs are the same diameter as the ones provided with the new bridge, it just...

Awhile back I found my trusty old Fast Fret had dried out, Not thinking much of it I ordered a new one. The new one is super different, no more felt, its more like a sponge with a plastic handle and the formula seems changed. Doing some digging around people are saying that it changed a few...

The other day I got the bug in my head that I wanted to own this pedal again, so I started to search it out on the used sites here locally, I found prices to be at the low end 285 euro going up to 577 euro!!! I thought ok maybe its just an Italy thing. I checked reverb and other places in the...

I always thought these were strange looking pickups...

Re: What do you use to cut strings? This might be right up your alley then.

Re: My guitar’s body is too thin, I guess... Suggestions? Re: My guitar’s body is too thin, I guess... Suggestions? That you did.... and yet somehow when i wrote my other post it slipped my mind like wooosh.... Here have another cat

As the title says I need a neck for an RG 750, It can be either maple or rosewood but it MUST be a first profile wizard and have the himalaya inlays. Let me know condition and price. Thank you.

Looking for a couple EMG81's (I will consider an 85 but more after 81's) but they NEED to be the old style solder type. I cant pass the quick connects through the body of this guitar and im not willing to drill it out so they can pass. If you have pots, jack, battery clip etc thats a plus...

Re: What overdrive pedal to boost a Marshall DSL 100h? Yeah check it out, I remember this issue

Last night played this guitar at band practice and everything was fine. Today I open the case and I see my JB has vomited all over itself. Looks like its just some wax over flowed out of the pole piece, the pickup is dead stock never been touched other than the screws being adjusted. Just...

Re: 20 Random Seymour W. Duncan Facts I didnt say dupont... its aCadillac codes... their own internal code for those colors is 20. Here notice both of these the list the paint code as 20