Recent content by ekkybedmond

  1. E

    Bridge humbucker to pair with A5 neck HB, 7.7 K

    I changes the wires, the output is now there, BUT 1) the V-Pot is defective, needs replacement 2) the Neck pup has a flipped magnet, and nowm with the wires reversed, the PG/GM sound is gone. Taling about keeping busy....
  2. E

    Bridge humbucker to pair with A5 neck HB, 7.7 K

    Thanks so much, back to soldering then 😃
  3. E

    Bridge humbucker to pair with A5 neck HB, 7.7 K

    I bought and installed a SNS in de bridge. Def more balance in volume and tone with the Neck PUP, so nice enough. However: the SD is 4 wire, installed as 2-wire, so red-white together and green and bare wire together to ground and black to pot. However: In the middle positition the volume...
  4. E

    Bridge humbucker to pair with A5 neck HB, 7.7 K

    Thank you, the bridge pup has Heavy Formvar wire, adding to the brightness. Are the SNS s with plain enamel ?
  5. E

    Bridge humbucker to pair with A5 neck HB, 7.7 K

    Hi there, Guitar is a (cheap) Vintage V100, AFD, which on itself is nice enough. the bridge is now a 8.3K A2 humbucker, and to be frank is much too bright and thin, and difficult to EQ an amp for for both pickups. They are not Seymours, but from a firm in Germany. The neck on itself is more...
  6. E

    Anyone replaced a super switch on a Charvel HH or similar with a standard 3 way?

    Hi there, just aquired a Ahs HH Charvel, hardtail bridge, thinking about getting me a TB-11 for the bridge PU. It's been a week and I am hating all pickups setting apart from full HB 1or HB 2. All other setting are useless, also useless is the switch, with the 'pauses' between setting. Thinking...
Back
Top