Recent content by Paully

€piphone P'ups My new €pi SG came with "Ceramic 8" Humbuckers. Does this mean that they have an "8" "Ceramic Magnet" ? Thanks. :fing2:

Re: Modding €pi SG VE Re: Modding €pi SG VE I had planned to replace the p'ups. But the Ceramics rawk.

Modding €pi SG VE Just ordered from SweetH20 today. I'm gonna love this guitar. Working on them is half the fun.of having them

I have some odds and ends laying around. My question is: Can I hook up a 150k resistor to a 470PF capacitor? And wind up with a treble bleed circuit?

I want to trick out my Strat for "classic metal". Is there a set of Seymour Duncan p'ups that will fit in a stock Strat body that will get me there? What about S.Coil sized 'buckers? I would really appreciate a push in the right direction. Thanks, And be excellent to each other

Hi, A friend just got an old circa 70's SS amp. Is switching to a three prong plug a "diy"?

Hi, Will this: https://www.sweetwater.com/store/detail/V5Infinium Drive this: https://www.sweetwater.com/store/detail/112TS Thanks for the help.

Hi, doing a std. Strat. SSS, 1v. 2t., but want the following mods. Bridge p'up tone enabled and controlled by middle tone knob. Neck tone pot. .022 cap and mid. tone pot .047 cap. Anyone have a diagram? TIA Paully

So, My Strat was sounding normal in the "middle" p/u position, but neck and bridge sounded about 1/2 volume and very thin by comparison. I bought a pre-made wiring harness from "ToneManGuitar". It came with new pots, new tone cap, new out-put jack and new 5 way switch. While installing new...

Looking For a Stock APH-1n With A2, Gold Cover a plus.:deal:

Hi, I've got a Yamaha Thr series amp. It has a simulated "Rack" Compressor. I was hoping that someone would be willing to explain what the heck the control knobs do so I can start using the Compressor. I understand what a Compressor does and have used compression stomp boxes. They just had a...

Im pulling the alnico V stock €piphone pickups outta the guitar. Its a hollowbody Joe Pass. Ive been thinking of going with alnico II's to get a jazzier sound. How bout some recommendations for S.D. pickups for jazz.

Hi, The "Audio In" jack on my First Act MA214 bass amp works fine. However, Plugging into the "Instrument In" jack yields a hum and no guitar sound. So, I'm thinking that the instrument in jack is at fault. If it is the jack can I just replace it with a regular guitar input jack? Any help is...

Planning on putting new p'ups using the "cheat method" On my fully hollowbodied Epiphone Joe Pass. So after I've clipped the wires on the stock p'ups Is there a way to test the clipped wires that are still in the guitar for hot and ground with a VOM?

Hi folks, I've got an Epiphone Joe Pass jazz box. I run 12-50 flat wound chromes on. I'm happy with the sound of the strings. And the guitar but I know that there's a jazzier tone hiding in This guitar. Right now the p'ups are stock Epiphone (Korean) the Axe was Built at the Samick factory in...