Hey guys, I took some power supply readings of some of my pedals & from some friends as well and thought I'd share it.
EHX Stereo Electric Mistress: Bypass-155mA, On-163mA
EHX Memory Boy: On-31mA(for lowest delay setting), ~25mA-medium & above delay settings, reverse happens with the modulation rate as in faster=more,slower=less. This pedal is a little strange, its requires 20secs or something to warm up, so I'm not sure if it does that in bypass mode, in which case the bypass mode uses the same amount of current as in when the pedal is turned on
Turbo Tuner ST200: Bypass-0mA, On-42mA
VS Garagetone Phaser: Bypass-6.2mA, On-9.6mA
VS Garagetone Tremolo: Bypass~8-10mA, On-15mA. Values go up depending on the wave knob, higher equals more.
VS Garagetone Drivetrain: Bypass-10.7mA, On-17.7mA
VS Open Road: Bypass-11.2mA, On-17.5mA
MXR CAE MC404 Wah: Bypass=On-6mA
Digitech DF7: Bypass-60.5mA, On-61.6mA
Those are all I could get my hands on. Funny, I had emailed digitech wanting to know the power requirements for the DF7 pedal & they replied saying 90mA. Well I guess some manufactures don't want to share stuff with random individuals or want to keep things on a much safer side by stying quiet. The one with the ehx memory boy is also lower than whats stated in the product manual.
In any case, thats about it
EHX Stereo Electric Mistress: Bypass-155mA, On-163mA
EHX Memory Boy: On-31mA(for lowest delay setting), ~25mA-medium & above delay settings, reverse happens with the modulation rate as in faster=more,slower=less. This pedal is a little strange, its requires 20secs or something to warm up, so I'm not sure if it does that in bypass mode, in which case the bypass mode uses the same amount of current as in when the pedal is turned on
Turbo Tuner ST200: Bypass-0mA, On-42mA
VS Garagetone Phaser: Bypass-6.2mA, On-9.6mA
VS Garagetone Tremolo: Bypass~8-10mA, On-15mA. Values go up depending on the wave knob, higher equals more.
VS Garagetone Drivetrain: Bypass-10.7mA, On-17.7mA
VS Open Road: Bypass-11.2mA, On-17.5mA
MXR CAE MC404 Wah: Bypass=On-6mA
Digitech DF7: Bypass-60.5mA, On-61.6mA
Those are all I could get my hands on. Funny, I had emailed digitech wanting to know the power requirements for the DF7 pedal & they replied saying 90mA. Well I guess some manufactures don't want to share stuff with random individuals or want to keep things on a much safer side by stying quiet. The one with the ehx memory boy is also lower than whats stated in the product manual.
In any case, thats about it
Comment