Re: Help with HH wiring in Ibanez S-series
Hmm, I thought I posted the below about an hour ago, but it's not showing up, so again: your interpretation about the "box" being the switch side is correct. It turns out the pre-existing diagram I worked from has the whole switch turned around backwards. Good thing you decided to test just the bridge pickup wiring first.
As for the 3DPT switch you have versus the 2DPT switch depicted, the wiring as drawn will work just fine. You will just end up with an unused "column" of lugs.
Originally posted by RexRemus
View Post
As for the 3DPT switch you have versus the 2DPT switch depicted, the wiring as drawn will work just fine. You will just end up with an unused "column" of lugs.
Comment