I have a Hot Stack Plus (STK-S9B) in the bridge and two stacks (STK-S2N) in middle and neck, with a 5-way blade. I followed the diagram for the two Stacks, and separately, for the Stack Plus, since I couldn't find a diagram with this combination. Each individual pickup is wired correctly, but neither of the tone pots are working. My question is - does the combination, vs all three of the same, change the wiring requirements for all three? Or should it work as is, following the diagram for the one Hot Stack, and then the separate diagram for the two Stacks? Hope this makes sense. Thanks in advance