1 Humbucker with a three way toggle coil split, 1vol+1tone.

[grungeman55]

Hey guys I plan on setting up my mosrite with either a JB model or a Hot rails, it'll be the only pickup in the guitar. I want to know if I am able to install a three way toggle switch that would work like so: In the down(bridge) position it would activate the outer coil. in the middle position it would be the full humbucker. in the up(neck) position it would be in the inner coil. Also this pickup would be connected to a volume and tone pot.
I've been thinking about it a lot and so far I know that to activate certain coils you need to either place the green and black wires together, and the red and white, but what of everything else?
If someone can please help, give a good description and maybe even include a picture I would be so happy. thanks!

 

[ericmeyer4]

Re: 1 Humbucker with a three way toggle coil split, 1vol+1tone.

I believe you CAN do it. This is how the people typically split the p-rails. I'm just not sure on how it is done yet.

I would start with these diagrams:
3 Way switch

Wiring Codes

P-Rails

 

[grungeman55]

Re: 1 Humbucker with a three way toggle coil split, 1vol+1tone.

alright yea I can see how that will work, since there's no neck pickup however would I only use one side?
and in relation to the activation of the different coils how do you think I would still get around the wiring?