1 Meg tone pot

ACH91332

New member
If you had a 1 Meg tone pot and ran on 10 would it sound pretty much like if there wasn't a tone pot at all? I know it wouldn't literally be "no load" but wouldn't it be pretty close? What would be the difference in tone having a 1 Meg tone pot compared to a 500K?
 
Re: 1 Meg tone pot

If you had a 1 Meg tone pot and ran on 10 would it sound pretty much like if there wasn't a tone pot at all? I know it wouldn't literally be "no load" but wouldn't it be pretty close? What would be the difference in tone having a 1 Meg tone pot compared to a 500K?
Mostly, yes. It's a good idea, and will make the tone pot more dynamic. Remember to use an audio tapered pot.
 
Re: 1 Meg tone pot

I don't think I've ever used a guitar with no volume. It's not overkill is it? Whats the advantage really?
 
Re: 1 Meg tone pot

I don't think I've ever used a guitar with no volume. It's not overkill is it? Whats the advantage really?

The advantage is less wiring. :D

Makes it sound a hair brighter, and a tad louder. (Like having the volume knob on 11.)
 
Re: 1 Meg tone pot

I don't think I've ever used a guitar with no volume. It's not overkill is it? Whats the advantage really?

Guitars without even so much as a volume pot are rare. Some Hawaiian lap steels are like this. Tony Levin's custom-made three-string Don't Give Up Stringray bass guitar had no control knobs. Adjusting them whilst wearing Funk Fingers would have been like using chopsticks. :scratchch
 
Re: 1 Meg tone pot

I just know some people use them and it has to be for a reason. Both of Jerry Cantrell's G&L Rampages that he uses for everything only have a volume pot, no tone. His Rampages are his favorite guitars. Then most Charvel San Dimas models only have a volume knob too.

Only way I've heard people describing it is that it gives the tone a little more oomph which is pretty wide open to interpretation honestly.
 
Back
Top