runfrmosticks
New member
i couldnt find it on the duncan page...i could just be blind and stupid. does anyone have schematics for my guitar? (Standard Fat Strat)
1 volume, 2 tone, 5 way, 1 hum, 2 single coils...schematics anyone?
- Thread starter runfrmosticks
- Start date
stratsandaks
New member
Re: 1 volume, 2 tone, 5 way, 1 hum, 2 single coils...schematics anyone?
Like this?
With the bridge pup split in the 4th position
http://www.seymourduncan.com/website/support/schematics/hum_2sing_vol_2tone_-w-spl.html
Or standard strat wiring, just pretend the bridge single coil is a humbucker in the schematic.
http://www.seymourduncan.com/website/support/schematics/3singlecoils_1vol_2tones.html
Hope this helps
Like this?
With the bridge pup split in the 4th position
http://www.seymourduncan.com/website/support/schematics/hum_2sing_vol_2tone_-w-spl.html
Or standard strat wiring, just pretend the bridge single coil is a humbucker in the schematic.
http://www.seymourduncan.com/website/support/schematics/3singlecoils_1vol_2tones.html
Hope this helps
Jeff_H
Dean Hardtail Fanologist
Re: 1 volume, 2 tone, 5 way, 1 hum, 2 single coils...schematics anyone?
:hijacked:
Sorry to hijack...the schematic with the split in the 4th position, is that the neck/mid position?
I am doing the same wiring in the morning, and I want the bridge positon (which I call position #1) to be the full Humbucker(59' TB), position 2 to be the middle single with one of the coils of the 59', then the rest of the positions to be standard. Which lug of the 5 way would the red/white wires go on for that?
Again, sorry for the hijack.
:hijacked:
Sorry to hijack...the schematic with the split in the 4th position, is that the neck/mid position?
I am doing the same wiring in the morning, and I want the bridge positon (which I call position #1) to be the full Humbucker(59' TB), position 2 to be the middle single with one of the coils of the 59', then the rest of the positions to be standard. Which lug of the 5 way would the red/white wires go on for that?
Again, sorry for the hijack.
stratsandaks
New member
Re: 1 volume, 2 tone, 5 way, 1 hum, 2 single coils...schematics anyone?
Jeff,
The bridge is full series and the notch position is split bridge+middle in that schematic.
The whole numbering thing on the 5way switches is confusing. I think the official numbering system starts with the neck as position 1 and the bridge as 5. I think of it the same way as you do though, that position 1 is the bridge, but I 'think' we're wrong. Anyway, I quoted the Duncan site stating that it was split in position 4 (our 2) :eyecrazy:
Boy that was confusing just typing it, hope it makes sense.
Jeff,
The bridge is full series and the notch position is split bridge+middle in that schematic.
The whole numbering thing on the 5way switches is confusing. I think the official numbering system starts with the neck as position 1 and the bridge as 5. I think of it the same way as you do though, that position 1 is the bridge, but I 'think' we're wrong. Anyway, I quoted the Duncan site stating that it was split in position 4 (our 2) :eyecrazy:
Boy that was confusing just typing it, hope it makes sense.
Last edited:
runfrmosticks
New member
Re: 1 volume, 2 tone, 5 way, 1 hum, 2 single coils...schematics anyone?
oh ok thanks. and whats a good soldering kit thats not too expensive?
oh ok thanks. and whats a good soldering kit thats not too expensive?
Jeff_H
Dean Hardtail Fanologist
Re: 1 volume, 2 tone, 5 way, 1 hum, 2 single coils...schematics anyone?
I just picked up a 25w Weller kit at Home Depot for $12. The only thing it didn't come with which I wanted is a stand...but I'll survive. 22-30 watts is all you really need, and definately no soldering guns. Too hot and you can fry components very easily.
runfrmosticks said:
I just picked up a 25w Weller kit at Home Depot for $12. The only thing it didn't come with which I wanted is a stand...but I'll survive. 22-30 watts is all you really need, and definately no soldering guns. Too hot and you can fry components very easily.
