2 Hum, 1 Vol, 2 Tone, Strat Style 3 Way Switch.
- Thread starter house
- Start date
Re: 2 Hum, 1 Vol, 2 Tone, Strat Style 3 Way Switch.
Start with this: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_2t_3w
But substitute the switch wiring from this: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=tele_2hum
Outside switch connections from the first diagram become the single solder points on the switch in the second. Center switch connection in the first diagram becomes the 4 solder points on the switch in the second.
Start with this: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_2t_3w
But substitute the switch wiring from this: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=tele_2hum
Outside switch connections from the first diagram become the single solder points on the switch in the second. Center switch connection in the first diagram becomes the 4 solder points on the switch in the second.
Mad Raxz
New member
Re: 2 Hum, 1 Vol, 2 Tone, Strat Style 3 Way Switch.
Well said by Dr Dave, another op is go to the following site and on the lower right hand select "2 Humbucker, Neck, Neck and Bridge, Bridge"
http://www.dimarzio.com/support/wiring-diagrams#1-4-3-1-3
Well said by Dr Dave, another op is go to the following site and on the lower right hand select "2 Humbucker, Neck, Neck and Bridge, Bridge"
http://www.dimarzio.com/support/wiring-diagrams#1-4-3-1-3
house
New member
Re: 2 Hum, 1 Vol, 2 Tone, Strat Style 3 Way Switch.
I check out that Dimarzio diagram. I was able to translate the wire colors. I got everything hooked up, but I get no sound out of the middle position. Neck and bridge are fine. Could you give me a little insight on what I screwed up on?
I check out that Dimarzio diagram. I was able to translate the wire colors. I got everything hooked up, but I get no sound out of the middle position. Neck and bridge are fine. Could you give me a little insight on what I screwed up on?
Chickenwings
Alnico 6/8
Re: 2 Hum, 1 Vol, 2 Tone, Strat Style 3 Way Switch.
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_2t_3w
combine that diagram with this:
The tele switch diagram should give you what you need. Just replace the les paul style toggle switch with the tele style one.
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_2t_3w
combine that diagram with this:
The tele switch diagram should give you what you need. Just replace the les paul style toggle switch with the tele style one.
Last edited:
house
New member
Re: 2 Hum, 1 Vol, 2 Tone, Strat Style 3 Way Switch.
Thanks Bro's, my Duncan's are working now, all cylinders are firing. I have the Anico II Pro in the neck, and it is a killer hummer for blues. I dropped a P-rail that I had lying around in the bridge w/mini toggle, and it has breathed new life into my Strat. Thanks for all the help and replies. Ya'll take it easy... :bigok:
Thanks Bro's, my Duncan's are working now, all cylinders are firing. I have the Anico II Pro in the neck, and it is a killer hummer for blues. I dropped a P-rail that I had lying around in the bridge w/mini toggle, and it has breathed new life into my Strat. Thanks for all the help and replies. Ya'll take it easy... :bigok: