EricSWales
New member
Hi. I am trying to wire up a 4 way Tele switch with Stacked neck and blade bridge, using only one dpdt pull pot to switch both pickups from HB to Single coil. Can it be done? Thanks.
4 way tele with split coils
- Thread starter EricSWales
- Start date
beaubrummels
Well-known member
Welcome to the forum.
Yes, it can be done. You wire the series link of each pickup to one center lug on each side of the DPDT (do not bridge them together, keep them separate), then wire one set of outside lugs to ground (the ground lugs you can bridge together on their way to ground).
Yes, it can be done. You wire the series link of each pickup to one center lug on each side of the DPDT (do not bridge them together, keep them separate), then wire one set of outside lugs to ground (the ground lugs you can bridge together on their way to ground).
Similar threads
