4000 posts on coil splits , but just this simple one, I can't find

[blueman335]

Re: 4000 posts on coil splits , but just this simple one, I can't find

So why not use a Phat Cat in the neck, and have a real single coil that's intended to be that way?

 

[Robert S.]

Re: 4000 posts on coil splits , but just this simple one, I can't find

!!!!! that sounds like my kind of job... !! I'd like to try this first

So in effect, (or in reality) , I'll be hearing just the slug coil?
and the screw coil is de-emphasized... by ALOT ?

thanks

Yes, by A LOT!

 

[alanfc]

Re: 4000 posts on coil splits , but just this simple one, I can't find

Fralin colors... red to hot, black to ground. Insulate the leads of the white and green and do not connect them to anything. That completely removes the possibility of the slug coil introducing any RF noise into the circuit. If you find that is out of phase with the bridge pickup, simply switch the red and black wires.

I'm back on this again---
I opened up the guitar and found this wiring on the Fralin neck "Unbucker"
(currently, as in Full mode):
-Red & Green soldered and taped
-White& Silver grounded to pot
-Black to hot

Fralin's site chart=
Black= inside slug coil
white= inside screw coil
green = outside screw coil
Red= outside slug coil
(whats this inside/outside business?)

Anyway all I want to do is disable the slug and hear only the screw!
I'm all for trial and error but CAN ANYONE JUST TELL ME EXACTLY WHAT TO DO??? :naughty:

THANKS