4pdt switch?

[jeremy]

halp! im rewiring a strat with hot rails neck and bridge, middle strabro90. what id really like is a 4pdt on/on/on switch that will mount where the neck tone would usually be so i can series/split/parallel both pups at the same time. does such a thing exist and if so, where can i get one! if not, ill have to settle for a 4pdt on/on for series/parallel. dunno where to get that either but i know they exist

 

[PFDarkside]

Would this guy work? Might need to use a pair of washers and lock nuts for the tone pot hole?

https://reverb.com/item/38976202-al...-4-pole-4pdt-toggle-switch-chrome-ep-4362-000

 

[Artie]

GuitarElectronics has a couple:

https://guitarelectronics.com/3-way-4-pole-on-on-on-toggle-switch/

https://guitarelectronics.com/3-way-...toggle-switch/

The URL function is messing up. When you get to one, you'll see the other on the side.

 

[Synapsys]

I had my tech install one of these to replace a single volume pot on a Dinky with a single bridge trembucker, wired for series / parallel / split.

https://www.dimarzio.com/hardware/switches/4pdt-pickup-selector-switch-3-position-ononon

 

[GuitarDoc]

Would this guy work? Might need to use a pair of washers and lock nuts for the tone pot hole?

https://reverb.com/item/38976202-al...-4-pole-4pdt-toggle-switch-chrome-ep-4362-000

WOW! That's expensive!

 

[GuitarDoc]

I had my tech install one of these to replace a single volume pot on a Dinky with a single bridge trembucker, wired for series / parallel / split.

https://www.dimarzio.com/hardware/switches/4pdt-pickup-selector-switch-3-position-ononon

$34.00 for a switch?!!!!

 

[GuitarDoc]

If you're going to pay that much you should at least get the one with the correct size shaft...

https://guitarelectronics.com/3-way-...toggle-switch/

https://www.ebay.com/itm/252632266579?hash=item3ad20e7753:g:65YAAOSw5cNYJl0u



What about using a super switch?

 

[jeremy]

super switch is a little limiting with three pups with so many options. i have a p/p tone to select the output of the strabro90 (tapped single coil). but really want to be able to, at least, have series and parallel options for the two hot rails. the split option is nice to have but dont know how much ill use it. $30 for a switch seems steep but a handle of jd cost $45 and thatll be gone in a week so in the grand scheme of things, not that big a deal i guess.

 

[Mincer]

I believe I have used those expensive switches before. They can pretty much charge what they want because not many people make or use them.

 

[solspirit]

I believe I have used those expensive switches before. They can pretty much charge what they want because not many people make or use them.

China makes tons of them and they work fine.
They're dirt cheap too.

 

[jeremy]

where are the cheap ones? all the ones ive seen are $25+

 

[ErikH]

Those are the big toggles. There are 4pdt mini switches for a lot less.

https://www.google.com/search?q=4pdt...hrome&ie=UTF-8

But those are for a much smaller mounting hole.

 

[solspirit]

where are the cheap ones? all the ones ive seen are $25+

Amazon, sometimes it takes a bit of searching.
you're looking for a full size or a mini?

 

[solspirit]

I wouldn't use a full size toggle