5 way wiring with humbuckers?

  • Thread starter Thread starter Nge147
  • Start date Start date
N

Nge147

Guest
How could i wire a guitar with two humbuckers with a 5 way with 8 poles so that position 2 is the pups split so its the inside coils and position 4 is the outside coils, or vice versa. Maybe a wiring diagram? Thanks.
 
Re: 5 way wiring with humbuckers?

I guess you mean 8 LUGS, 2 POLES.
I bet you need a super-switch for that (4 POLES, 20 Lugs) or some of the very special Ibanez ones, or some Mega-switch that has that trick.
 
Last edited:
Re: 5 way wiring with humbuckers?

check out this Ibanez diagram, it shows many options
http://i62.photobucket.com/albums/h89/sevenstringbassist/rg1527wiringdiagram.gif
I really like this set up, my Premium is wired this way from the facrory

This isn't using a standard strat style 5 way switch though. It looks like one, but it's not. It's a switch made by Cortek specifically for Ibanez. You'll need the special Ibanez Cortek 3PS1SC5 switch, or go get a super switch or mega switch.
 
Re: 5 way wiring with humbuckers?

This isn't using a standard strat style 5 way switch though. It looks like one, but it's not. It's a switch made by Cortek specifically for Ibanez. You'll need the special Ibanez Cortek 3PS1SC5 switch, or go get a super switch or mega switch.
Thanks to specify Ibanez' model. I never have it at hand!
:D
 
Re: 5 way wiring with humbuckers?

I guess you mean 8 LUGS, 2 POLES.
I bet you need a super-switch for that (4 POLES, 20 Lugs) or some of the very special Ibanez ones, or some Mega-switch that has that trick.
yep. there is a Megaswitch that has these two sounds. it's the one that copies the PRS 5-way rotary switch:

http://www.stewmac.com/shop/Electro...s:_Switches_and_knobs/Megaswitch_P-Model.html

but its third middle sound is a series one--kinda lame.

you can also use a super-switch to get the same combinations that that special Ibanez switch gives. some Ibanez guitars used a super-switch for that instead of that special switch. if you look for wiring diagrams for e.g. the RG2027X or RG2020X, they should show the schematic of how to do that.
 
Back
Top