Just picked up a used blackout tele that has Pearly Gates in bridge and reverse-wound, reverse-polarity '59 in bridge, 3-way switch. The middle position is both pickups out of phase. I want to install two push-pull pots to split the coils on both HB's (probably having the slug coil be the single coil). I understand how to wire it up if both HB's were standard wired. How do I account for the RW/RP bridge pickup? Do I have to switch the magnet or any such thing? Thanks much.
'59 reverse polarity in blackout tele
- Thread starter martyman
- Start date