Active Live wires 2 volume, 1 tone wiring help

[FATMAN]

hi guys, i have a set of dave mustaine live wires ready to install in a new guitar build, the wiring diagram that comes with it shoes how to wire it up with 2 vol, 2 tone 2 way selector. i will be useing 2 vol, and 1 tone, and a 2 way selector any suggestions on how to do this and possibly a diagram, thanks guys.
any help is appreciated

 

[SamusChief]

Re: Active Live wires 2 volume, 1 tone wiring help

This is mostly correct. Is there any way you could grab a 3 way toggle instead? This is the diagram for 2 vol, 1 tone, and a 3 way rather than a 2 way.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_mustaines_2v_1t_3w

 

[FATMAN]

Re: Active Live wires 2 volume, 1 tone wiring help

yes i made a small mistake i am using a 3 way toggle, thank you, i estimated that's how it would be done, thank you very much for your help

 

[FATMAN]

Re: Active Live wires 2 volume, 1 tone wiring help

i have little experience with actives so one last question, i have to ground the bridge/stop bar to one of the pots, correct?

 

[ParameterMan]

Re: Active Live wires 2 volume, 1 tone wiring help

No you don't. That is what you would do, but active pickups are quiet enough you don't need a string ground. It's also safer without one if you plan on getting near old building wiring.